In case anyone else gets this problem I cured it by changing $10 from 3 to 1
bob
Type: Posts; User: redpiperbob
In case anyone else gets this problem I cured it by changing $10 from 3 to 1
bob
Hi all please can someone help
I have built a AntPCBMaker and have just tried to find out what build version it is when I restart the stm board I get th grbl version then a load of positionng lines...
Hi all
can you help please I get an error when in cad 2d and going to machining, milling module
I get a message "mode argument is invalid"
can someone help out there please
Bob
Hi All
I hope someone out there can help me please.
I am building a laser cutter/engraver based on the Bdring model with maker slides and v slot rollers.
I have had this working with <ach 3 and a...
Clarke Mill Drill
For sale Clarke 1250 mill drill in excellent condition.
Includes X axis Power feed.
please email for more info
I live in Inverness UK
Bob
List Date: 7/26/2014
Location:...
Hi Hos
thanks for that
Bob
Hi Andrew
Thanks for taking the time to reply that is exactly what I thought as regards the nut mount. It just seems strange that there are no positive locking screws to hold the mount .
Thank you...
Hi Andrew
I wonder if you can help me please I am just starting to convert my BF20 to CNC I have got Hos's DVD and have bought the Automation Technology C7 ballscrews . The problem I have is how is...
Hi All
I am looking for some help please .
I have a 3 axis CNC router table I am building out of 8020 with 3 stepper motors and a Hobbycnc 3 axis control board. I would like to use a MPG with this...
Sorry Steve I have just seen the postage price too I will send the 70 pence just now.
Bob
Hi gerald
Thanks for the reply. I have a 20x4 display but you ARE a star rechecked the lcd lines and had a dry joint on pin 16 GND all working fine now.
thanks again.
Bob
Hi All
I thought I had this project up and running. But no I have a problem can you help
when I start the indexer up I get the "enter profile" screen up. if I press any of the number buttons then...
Hi Steve
GOT IT
all up and running. As you know I built the indexer on stripboard. Well I didnot cut one of the tracks properly inbetween the legs of IC1> This stopped the Xtal from resetting the...
Hi Steve no i did not find anything with the display joints although I did go over them again I could not find any shorts or dry joints on the strip board. so I dont know where to go from here.
Bob
Hi Steve its gone from bad to worse no beep now and no freq from Xtal.
I think I have blown the pic. although it still verifys But that only uses the prog pins.
if i press a button I some times...
Hi Steve thanks for that.
Yes I do have a beeper attacthed and it is working when I press a button.
I will look at the lcd connections.
Thanks once again
Bob
Hi All I sent this email to Steve(qwackers) But I would apreiciate anyone who has an idea of what I have done wrong.
"Hi Steve
I hope you dont mind me emailing you direct . But you said you...
Hi Steve Can you help please the stepper board I have has the connections
+5V
GND
CP
DIR
INC
DEC
can you tell me which conection on my stepper driver board goes to which pin on your indexer...
Hi Luc
I hope you dont mind me posting this but I think there is an error in the copper pdf. in the bottom left of the diagram you have two resistors that I think are R7 and R8 the left one (R7)...
Hi Steve not to worry stripboard it is. Ill let you kow how I get on.Thanks for all your hard work on the project
Bob
sorry about the double post
Bob
Hi Steve
I etched a board for your rotary table indexer. But it has not come out too well my problem is that i only have the iron-on material to stick to the board and your board is too fine a...
Hi Steve
I etched a board for your rotary table indexer. But it has not come out too well my problem is that i only have the iron-on material to stick to the board and your board is too fine a...
Thanks Steve JDM ordered
Bob
Hi Kwackers
can you tell me if the K8076 - PIC Programmer Board KIT can programme the pic 18f452 chip. I have emailed the makers but have had no reply. While I am on thank you for all your hard...
Hi John
The machine I'm making is 1 metre long 450 mm wide. To cut Balsa and Ply for homemade kits.
I will be using ground mild steel guides, bushing ball bearings, and Stepper motors.
I am a...
Hi All
My name is Bob Sims I build and fly radio controlled models and Have a model engineers workshop.
I am just about to start construction of a cnc router table (to cut parts for RC aeroplane...
whoops what have I started
Bob
Hi Diarmaid
Great to see you have got things working. But I would not use Din plugs and sockets for your motors as they will not handle the current. One other thing your 10 amp fuse should be on the...
Hi Diarmaid
you dont have to tap the heatsink you can just drill it with a convenent size (one that will go through the holes in the chip) and use nuts and bolts to fasten the heatsink to the chips....