is this the upgrade that bricks the controller or is it good?
RZNC-0501,RICHNC,RichAuto-Beijing Richnc Technology Co.,LTD - RZNC-0501,RICHNC,RichAuto-Beijing Richnc Technology Co.,LTD
Type: Posts; User: battwell
is this the upgrade that bricks the controller or is it good?
RZNC-0501,RICHNC,RichAuto-Beijing Richnc Technology Co.,LTD - RZNC-0501,RICHNC,RichAuto-Beijing Richnc Technology Co.,LTD
very good. and accuracy is suprisingly great!
they are probably the best frame that was ever made on a router. i have one in my garage at home. uccnc conversion and running on single phase its a fantastic bit of kit. especially if you buy it at...
i have the parts for repair for this.
however. its worth way more than 500 if you weigh it in! due to weight and scrap prices.
strip the heads and motors off it and get it collected by scrapyard :-)
what controller do you have? the side drilling is usually a macro in the controller.
i use vcarve pro for my edge drilling with the post processor i wrote.
works in 4 directions.
i come here about every 6 months to see what ive missed!
4 core flexible with minimum core of 4mm. ideally braided. earth the braid at vfd end only
Checked with fuling
The single phase 220v models do not make use of external resistor.
They do not close the internal brake relay .
I set up a 6kw high speed Atc spindle
I had to reduce...
if your machine has ac servos- its quite easy by swapping the drives. (easiest way)
if dc like mine- id consider new motors/drives
was very complex the way i did it 9 years ago. but the machine...
just confirm your on screen rpm is roughly the same as vfd frequency- then use on screen display.
i prefer to monitor current on the vfd- it gives a great insight when your tools are going blunt or...
if you cant get serial comunication working- i found the gt series needed 2 wired soldered links moved. i have details
i got around this 00 thing by drawing with 0 point in top left.
changed my y values + - in the post
changed - y to --y to create a plus (took ages to work that one out )
i think i did same...
on my older machines- i would just write it into the code
ie
n10 lpx=10 lpy=50
etc
i mainly make cabinet parts with uccnc- where everything must clip and fit together- so accuracy is paramount.
not once have i had to switch to g61 exact stop mode :-)
i upgraded from usb 300 to...
i wrote a fully working bobcad post about 8 years ago- unfortunately- i hated the program so didnt use it very much.
i lost the post id written from a virus strike - which was a pretty long drawn...
the new hy gt series and ecogoo have all the features ive found on any of my top brand stuff. (control techniques , yaskawa, mitsubishi etc)
they are sensorless vector, blah blah blah.
im running...
i have both water cooled and air cooled chinese spindles on my machines. air cooled are fine if used correctly- and a lot less faff than the water cooled models. by correctly i mean run them at the...
how many decimal places? :-)
[QUOTE=davemorl;2116298]Ok! Thanks! I think I'll stick with the UC300 for the time being. I have heard that UCCNC performs well if not better than mach3 also so I think I'll give that a go.
i use...
austin. i just received a new 220 to 380v inverter that does up to 650hz !
tested on a spindle and works fine ...
ive just ordered a new inverter- chinese- never heard of them before- made by ecogoo.
looks very similar to huangyang. says its standard modbus and instructions are in english.- this could be fun! ...
[QUOTE=austin.mn;2051520]Here is the link to the youtube video with the 220/380 vfd
https://youtu.be/C_xe_VP0_ps
its great isnt it---- its mine !
austin
according to inovee they have a vfd that will do what you want-
my query reply posted below
Thank you for your reply.the blue is our answers.
Price for 7.5kw 220 single phase to 380v 3...
great work on this dan. il try to get it set up on a control techniques drive i have had on the floor by my pc for the last year! have the settings already been done for these?
annoying that your spindle is 6 pole!
some facts on here that were wrong- just to clear up
the hsd 9hp spindle is max speed 24000 rpm 400hz . ( the lable does show 12000 at 200hz- which is...
Did you get this going ok?
try under general settings tab- ignore macros when loading
Send me an email to [email protected]
See if that gets through
It's normally 100psi to operate the tool release draw bar and 60psi as cone clean pressure- to be applied when the draw bar is open.
That's normally all that is required
Some spindles also use...