Dear,
Thanks in advance for all your efforts:
I need the FANUC 21M I/O wiring or the maintenance manual.
Best regards,
Type: Posts; User: JuanCruz
Dear,
Thanks in advance for all your efforts:
I need the FANUC 21M I/O wiring or the maintenance manual.
Best regards,
Dear,
We have wired a pair of relays with no changes.
If this could help you, find in the following photo the relays blocks that our machine uses.
...
Hello Mr,
Thanks, tomorrow we will check it.
We have already checked in the relays 24V, 0V, AC, DC grounding, sourcing, blaming, or saying beautiful things to the control with no result....
Dear Gentlegiant,
Thanks for your help and your time. We usually construct our dedicated systems and use control and actuator as the ones you've told.
The problem that we have is that, even...
Hello everybody,
We are doing some improvements to our machining centers (automatic clamp system by code, piece count in big screen, buzzers, ...). We are going to begin with two machines with...
Dear Heavy_Metal,
Best solution ever!! Thank you very much, just adding the tool change height (G91 G28 Z0.), the program does not stop.
Best regards!
Dear H_M,
Of course, find one of the subprogram below.
O0801 (SUBRUTINA TALADRADO COMPENSADOR 51x21)
M06T1 (TALADRADO DIÁMETRO 11,70 mm)
M3S3500
M8
Sorry, program stops when executing a subprogram.
Also, do you know how to execute automatically?
Dear,
Thanks for your fast replies. We change the coordinate system in the main program before executing several small subprograms. In bold you can see below where the program stops.
DRDOS:...
Hello everybody,
Our new machine acquisition has a small problem in regular operation. It's a ENSHU DT-CL with a FANUC 0M control.
During program execution, if we want to change the local...