Search:

That doesn’t work with your software -unfortunately- it’s too old!
From V3R10.0 the following works:

(example for a useful usage of the register)
G201H0
RG 01 = 10000.
RG 02 = 2000.
RG 03 =...

Hello everyone
I need your support: I want to identify the current position of the drill hole with Cycle 421 automatically.

Imagine the reference point is the middle of X and Y and I have to...

Okay, I don’t know what that is but alright...
However when the insert breaks then of course I have to exchange it immediately not after 300 blocks.

Hope you can give me some advice!

Hello
As Kassi already said you have to press the PAUSE BUTTON- that’s the one next to the Hold button. Then the memory goes empty and after 20-50 blocks the NC will stop. So now you can run with...

Hello
I just thought about something else... have a look in the service under MAINT PROBE if the radius is entered there. If not then that means, that the sensing device is not calibrated. Then...

Hello
Check path C:FidiaWScca.dat.; in the CCA.dat you will find the minimum information.
For example:
5 Origin
10mm C1x
10mm C1y
100mm C2x
100mm C2y
3000mm Maximum Radius
10mm...

Hello,

Try the following: run with an offset the outline as a zero contour as an Nc program in the W-axis (CQA WP +50.). Not over the Isograph but over the CNC.
Meaning with EXCECUTE START...

You can mark the row and press F1 to see a command about the error message. It often doesn’t help though.

Log in at Service and than via Search convert the parameter ROTO_CQA with Enter-button.

It might work.
Greetings