bend the knee to the KING
https://www.youtube.com/watch?v=6kK5pS6ABC0
Type: Posts; User: romanos1983
bend the knee to the KING
https://www.youtube.com/watch?v=6kK5pS6ABC0
dck increase microsteps and dicrease amp and se if its better
if not, change your PC and Bboard
hello. he didnt say that the motor vibrating at stop position
Steppers ARE noisy, did you even used other than geco steppers? i used more than 4 brands and they are diferend in noise. gecos are very...
i cant se any vibration in the video
if you mean the noice you can lower it by lowering the amperage for example if it is at 4 amp make it 1.5amp
you can change the amps from stepper drives just...
1 The driver is set to 1/10
103.93 steps/mm?
without the reduction 5:1 its only 20,786 steps/mm it way too low for smooth motion you need at least 120 steps/mm(600steps/mm with 5/1 reduction)...
like John-100 with normaly open switches the wiring is more likely to pickup electrical noise
try to increase mach3 debounce in general configuration
hello
1 did you set a bigger microsteps on steper drive?
2 did you check to move the axis without motor attached to se if you have vibration?
3 what kind of vibration you have? consistent or...
the smallest the teaths the better
big theath have big polygon effect
but in 3/8 pitch with atleast 15 teaths is almost no polygon effect, only 0.02mm error which is good for cnc plasma machines...
And here's a painted one
340508
340510
340512
340514
340516
340518
and here is the real one :)
https://www.youtube.com/watch?v=5anb1eZmaMQ
hello guys
please let me know what do you think about my new cnc plasma design
https://www.youtube.com/watch?v=GR_SFCrdWy4
Thanks Kerryfisher
on single sided support you can load any sheet size and cut sectors if you have table on the side of machine
Guys just to make it clear I do not advertising my machine, i dont iven plan to sell them outside Greece, i just need your opinion especially for the Z axis (the cutting head)
I design it to look...
Tanks Curtis
yes Solidworks is the best (my opinion) the motion you see in this video is not animation is just me drugging the axis with mouse. For Zooming, Panning and Rotating im using 3D mouse....
Fast heavy CNC router "scorpios X3"
https://www.youtube.com/watch?v=cZhbnFGVd84
Thanks Krieg.
The building process is already begun
I love the single supported arm too, it maby a bit harder and expensive to build but its good for those who have limited space and want to load...
hello guys
please let me know what do you think about my new CNC LASER design (for cloth)
https://www.youtube.com/watch?v=IO0bHLPJeaU
hello guys
please let me know what do you think about my new cnc plasma design
https://www.youtube.com/watch?v=GR_SFCrdWy4
hello guys
please let me know what do you think about my new cnc plasma design
https://www.youtube.com/watch?v=GR_SFCrdWy4
https://www.youtube.com/watch?v=-legnk77vNI
scorpios X3 first G-code test run on aluminum
https://www.youtube.com/watch?v=-sFk9FbUpws
hello all :cheers: take a look at my new baby
316524
316526
316528
316530
316532
316534
hello.
here's my cnc i name it scorpios take a look and tell me what you think :rolleyes:
scorpios - YouTube