I run a Busellato Jet3000 3 axis running Genesis software
I have been having a Z axis servo error come up and also says Z axis cannot finish movement.
I have had two engineers look at it, one...
Type: Posts; User: m9g
I run a Busellato Jet3000 3 axis running Genesis software
I have been having a Z axis servo error come up and also says Z axis cannot finish movement.
I have had two engineers look at it, one...
Hi
Admin - hope this is ok to post
Im in the UK
My boss is potentially after another CNC as mine keeps breaking (getting old).
We are after a 3 axis with a bed with pods (deffo not a...
Ok well thanks for taking the time to reply really appreciate that but xilog plus is different to xilog3, you dont get a file tab
Cheers
Hi thanks for that, are you using xilog plus as those options you suggest aren't available in xilog3, there is no file tab to click on
Cheers
ok thanks, yeah if you wouldnt mind please
Cheers
Hi
I have never been able to work out how to create what i believe to be called a mix, basically bring up a mix which will run 2 .pgm files one after the other i.e. machine one side flip board and...
Contact SCM service department via e-mail
So company I work for has a busellato jet3000 running an early version of genesis, they are buying another cnc, an SCM tech80 plus running Xilog3
The genesis has approx 1500 programs on it and...
Hi I'm running Xilog3MMI on an SCM machine, I am trying to enter the panel in Z with an arc along the X axis keeping the same Y axis
At the moment I'm starting outside the board and entering in a...
Hi
I setup a sticky at the top of the chinese cnc section, just use this file to configure your machine, it works perfect, it even puts the X and Y axis around the right way but you can swap these...
just a thought, wouldn't the 6040Z motor and spindle fit onto the 3040?
by the way if you'd rather keep the X and Y axis as default that came with the machine i.e. X short side Y long side then just use this file but swap the 16 and the 4 around and the 5 and 17 around...
I have attached the Mach3Mill.xml file into the link below which thanks to admin is now sticky at the top of the Chinese machine forum....
...
ADMIN - could you make this sticky please as it will be very useful for others that like me found 4 user manuals online, all exactly the same except the settings are different
Hi
I have finally sorted this machine and have it setup correctly after a lot of available manuals for the same machine with different settings.
I have swapped the default X and Y axis around...
Sorted thanks :) - attached digital verniers to the spindle with a cable tie and ran the steps per config in settings
Hi
I have one of these machines and am interested in increasing the size of the Z axis spindle, you mention the Kress FME800 - apart from creating a new bracket to hold it in place can this not...
Ok thanks will try that later :)
Hi
I have had one of these machines for a couple of weeks and have run out a few bits.
Problem I have is when maching in Z axis when its stepping down it's gaining distance, for example a...
Hi I have bought one of these machines and OMG!!!! the chinese to english translation is awful
Has anyone got theres up and running fine? if so, can you send me a copy of your mach3 settings...
I am after this aswell :)
the post is rlink by scm for routalink which i now have.
I did just a simple point to point line just to try out the post
I can click on "list nc code" and a box appears with all the codes in...
Just started a new job and the machine is an scm record 240 and has Xilog3mmi on it, i'm teaching myself G code programming but if I can I would like to use alphacam v7 which i would like to learn as...