I know this is a year old but did you ever find a fix or help? A friend of mine is having the same problem.
Thanks
Type: Posts; User: crclark
I know this is a year old but did you ever find a fix or help? A friend of mine is having the same problem.
Thanks
Thanks a ton, There is a braking resistor in the machine. The resolver is in the spindle servo motor but there is a simulated encoder output in the drive (DB9) that I can use to the motion controller.
I have a small VMC that came with no NC, it has a Baldor servo motor for the spindle with a resolver. The drive is a Microflex, I have done the auto tune with the Mint software but I need to get some...
Glad you got it all worked out. I was going to point you to a small board that provides +/- 10VDC for your spindle drive.This what I'm going to use IF I can configure the spindle drive to orientate...
Fusion, but I'm just learning it and I'm just a hobbyist and am quite away from actually making a part.
Thanks
thanks a ton, How do I find someone to write the post processor for me for a fee?
I finally have some tooling, I can't figure out how to get the tool offsets into the Fanuc O-T control and I'm hoping someone has a post processor for the Emcoturn 320 with the Fanuc controller for...
thanks, remember if you need parts let me know, remember I have a second parts 320 but its the Siemens controller.
Also this is strictly a hobby for me and I enjoy helping others, I just do it to...
Most of the info you'll need is in the ET320_EN2769_C96-10.pdf file.
What material and size did you use for the small window?
Thanks, In the documents I sent you the process to align the tail stock is in there. Did you get the files?
More pictures of what came with the machine.
I've made tons of progress in the last few days, the lathe is able to run a program that was on the machine completely without alarms.
- With the help of you all and reading the manuals I've...
heres some documentation, hope it helps.
Well the PDF files are to big for this site :( if you have a dropbox or someting I'll upload them for whoever needs them. These are the Emcoturn 320 /...
Thanks spumco and everyone else posting in this thread. I was worried because I didn't see any new posts since around 2010 or so.
I tried and tried and then I had the spindle spin! but now I cant...
I would really appreciate and help with getting my machine to do anything lol, No errors, just dont have a clue about the Fanuc O-T controls. Cant get a simple MDI command to see if the spindle runs....
You are a God send! I have 2 Emcoturn 320's. One with a Fanuc and one with a Siemens controller. I've written off the 320 with the Siemens controller because the config is lost and on paper tape!
I...
Did you ever get your Emco running?
Hi,
I have a Emco 320 / Fanuc O-TC that is configured with a LNS Hydrobar bar feeder. I have the lathe powered up but the Lathe is expecting a bar feeder to be connected and its not available...
I purchased 2 Emcoturn 320's, one with the Fanuc O-TC controls and the other with the Siemens control. The Fanuc machine was viewed powered up with an alarm.
The 2 machines were brought home...
Here's the config file and sheet for my Emcoturn 320 with Fanuc O-TC controls, My machine is configured with a LNS Hydrobar bar feeder so you will have to figure out how to remove that part if you...
Thats to bad they wont help, I've read that someone had luck with contacting the European Emco office. Emco Europe sent him what he needed. I have several Emcoturn 320 documents that I can send you...
I know this thread is a bit old but I have just purchased 2 Emcoturn 320's and there isn't much out there about these machines. One of the 320's has the Fanuc OT and the other has the Sinumerik 810....
I just bought a 320, I went looking for the sheet and hopefully a floppy backup disk. It was hard to find but behind the sheet in the plastic holder there was a disk! Maybe yours has the disk hiding...
Thats great news Zhang, as soon as Chris has his new controllers I hope he will test them and let us know how they are working. Once the motor/controller are tested I will be ordering a set from you...
Thanks cj, I appreciate your reply very much. I will wait too purchase the controller/motor from Zhang. I contacted him in regards to purchasing the controller/motor setup he's selling but thanks to...
Hi everyone, I'm wondering if cjdavis618 ever got looked after as far as having his defective motors and controllers replaced. If so I would like to see another review by cjdavis618. If the review is...
Thanks Mad, I did watch all the videos in the link you provided. Now I'm trying to decide if I should use direct drive or belt drive for the Z axis. I have a NEMA 34 906 oz stepper for the Z and a...
Oh by the way its a Lenovo M55P 8808 of ebay
Sent from my ADR6400L using Tapatalk
Perfect, thanks both of you for replying. I just got the pc I'm using for Mach 3 / linuxCNC. It's perfect I think. 3.4 Ghz pentium D processor, 4 GB ram and a IEEE 1284 compliant parallel port for...
Oh ya money disappears fast for sure:) I was wondering if your machine came with the Z axis lead screw that is only supported on the top. My lead screw has nothing on the bottom, its just loose. When...