This is the schematic for the 1100m
https://www.cnczone.com/forums/attachment.php?attachmentid=442032&stc=1
https://www.cnczone.com/forums/attachment.php?attachmentid=442034&stc=1
Type: Posts; User: cbyrd
This is the schematic for the 1100m
https://www.cnczone.com/forums/attachment.php?attachmentid=442032&stc=1
https://www.cnczone.com/forums/attachment.php?attachmentid=442034&stc=1
If you are running v2.4.2 or later you can issue the command ADMIN RAPIDS SHOW and it will display the current settings, ADMIN RAPIDS SET xxx to set the new speed. I am pretty sure you can select...
I have one of the original tool racks that had acrylic shelves. It works wonderfully.
https://www.cnczone.com/forums/attachment.php?attachmentid=428688&stc=1
I will take the 3jaw chuck w backing plate, int and ext jaws and key ($350) $150.
Chris Byrd
I would check your SMB settings in Windows 10. If you go to the control panel > Program and Features. Select the turn windows features on and off...
Here is a post that works correctly. It was fixed on 5/26/2017 - Fixed G59.x output for Tormach PathPilot post.
https://cam.autodesk.com/posts/download.php?name=tormach
Version 41497. It was...
There is an updated post available. It was in the forum yesterday and they are going to post it on the post site soon.
It should be near the top of the forum
Chris
...
I had a conversation with one of the software guys a while back about 5th axis support. They said that Pathpilot aka tormach does not support 5th axis and no support on the horizon, since they do...
I got the CNC Cookbook Special, It was $269 per side and free shipping. I think $299.00 is the normal price. I am not sure if they are running the special still.
I added the monoprice Video...
I have not had them make any noise while running my machine. You can always put some weather strip on the back of the strip also to make it quieter.
That is just have my boxes. I have 4 more on...
I don't think they have it on the website. I would just call Paul or John.
I have both the tool rack and the monitor rack. They save lots of room.
I added a monitor arm so I can move it to see the screen when doing setups.
They also make wrench, hammer and vise handle...
As SCZ stated, the G59.3 is the limit of Pathpilot. I am not sure of the Linuxcnc limit, but it makes sense.
I always leave one of my setups (G55) as my offset for my ETS.
Here is the code I use in the fusion post to get the correct work offsets.
You can search for G59 and look to match the code.
// wcs
if (insertToolCall && properties.forceWorkOffset) { //...
I filled the curved area at the bottom of the sliding door with silicon and formed it so the coolant would run back into the machine. I get a little drip from time to time but not bad.
If the...
I just went to the local tractor store and got mine.. I think any iso68 will be fine.
I use a shop vac with a dust deputy to pick up aluminum to recycle and also for plastic and wood to dispose of.
The Dust Deputy
To do metric you will have to use G21 to switch to metric. This causes everything to go metric. Pita. I just convert to inch and run.
There is no spring pass in the conversational as I know...
I have a full enclosure and left the control panel in the machine. I used the remote relocation kit and mounted it on the outside so I still have a stop and green start button on the outside. I...
Whatever is loaded in the tool table in cam is going to determine the tool path. You may break bits if they are really different.
The tool table in path pilot is only going to use the tool...
From what I saw, It will allow a mix of flood and air blast. I think if you can use the fog buster and mount some other air solenoid to do a air blast. You can program the air blast at given...
I have been using it since the open house. It really works well. I am ready for the Mutli Cool to come out so you can do a air burst with it..
I do not believe so. The top of my ways do not have any oil on them when I run mine. I spray my ways and ball screws with E-900 Ball Screw Lub made by Nook. John W at Tormach said that the...
When I was drilling 1018 for threaded inserts, I could drill about 25 5/8" - 3" deep holes before I would touch up my drill bit on the drill doctor.
I mounted 2 drills in a gang setup. I had the...
You might try .0035 or .004 feed per rev or even use a solid carbide drill. Sometimes they drill faster. I know if I go above the 500rpm the bits seem to dull very quickly, even using coolant.
I went back to my fusion cam setup for drilling. All the parts had a pre-drilled hole of 7/16. I then opened the hole to 5/8. I was running 500rpm at .003 fpr. I was using chip breaking with .05...
I have drilled some 12l14 and was only running 300-500rpm. I also drilled a 1/4" hole first and then drilled my 5/8". Was at a feed rate of .002 per rev and did not have any problems with slip. I...
When I engrave NFA items to meet the ATF requirements I use the carbide engraver because I can not get a deep enough cut with the drag engraver. I have tried multi pass on stainless and the best I...
I know my z axis is hot to the touch. I was installing something though the back cabinet and was standing on the table. I used the z motor for balance and it was quite hot. Even when machine is...
If it is not triggering the Accessory Light it maybe the probe is not compatible with the PCNC 440. I would ask Wildhorse to see if they tested it with the 440.
When I use the passive probe on...