Looking for a small die to use to die cut rubber for prototyping/low production runs. Profile of the pieces that are to be made with the die are attached. The die will be cutting 0.5-1.5mm rubber...
Type: Posts; User: AuroraDrvr
Looking for a small die to use to die cut rubber for prototyping/low production runs. Profile of the pieces that are to be made with the die are attached. The die will be cutting 0.5-1.5mm rubber...
Closed. Thanks All
CLOSED. Will update everyone who sent in a quote this weekend.
Thanks All..
Need to have some parts made for another project. The part is basically a 16x3mm turned delrin disc, with two 4.5mm grooves cut on each side (one per side), 90° to each other (These groves run...
I'm not opposed to having these made however you'd like. Laser Cutting would probably be very simple and only require one pass. Just a matter of setting up the printing files.
Need to have some pretty simple shims made up. Find the attached PDF drawing. Material is either Polycarbonate or PETG, in 0.5mm (0.02"). Starting quantity of 40, with strong chance of production.
...
You're right, I should've clarified. We're talking about carbon fiber laminates.
Parts will never be exceed a 18"x12" footprint. Usually much smaller, actually. First piece is 4x10" IIRC.
...
I do not have any files done yet, but I am looking to find an outfit who can do some lower quantity production carbon laminate routering for us at reasonable pricing. Mostly 2.5/3mm and some 5mm...
Need someone who is capable of routering a 36" x 24" x 1" sheet of MDF. I will be using it as a low-cost composites layup mold.
There is no 3D (I think), Just X,Y, depth of cut and transition edge...
Right now the project has been put on hold. We may or may not pick it back up at a future date.
Thanks.
Since there doesn't seem to be a whole lot of interest in doing them in Carbon (don't blame 'ya), I am going to open this up to also quoting the same design in aluminum (6061 and 7075).
Edit - I...
Looking for quotes on the following design.
Units: Centimeters
Tolerance: 0.005cm
Material: 2mm or 3/32" Rigid Carbon Fiber Laminate
Quantities: 1, 5, 10, 20
Turn Around: Open
Forgot...
Sorry for the delay guys, been a hectic few days. I will get in touch with everyone tomorrow.
Thanks,
Todd
Need a quote on some more turned aluminum pieces. (chair)
Computer recently dumped on me, so I am on my old one, with limited design sketching abilities. All sketches are in JPG's and posted...
FWIW you can export with Inventor to a variety of file types. IGS is one of the supported...
Here are the files for those who have PM'd me.
Part is to be made out of 1/4" Black ABS. The ABS should have a Haircell Texture on a single side, the side which is too be routered should be the...
Looking to have 50-200 pieces, approximately sized at 48" x 20", CNC routered. Material is an ABS plastic. Please PM me if you have the capabilities to complete this task, so we can further discuss. ...
Yes, someone brought this to my attention in a PM, I kind of missed this point when designing. An under cut should suffice to allow Part 2 to tighten down fully.
I will leave this open for 1...
Second Piece (Part # 002)
Material - 6061 Aluminum
Units - Inches
Tolerances - +/- 0.01" (Except the 3/16 hole & 1/2-20 RH, need to be exact)
Turn Around - Sooner is good, but cheaper is...
AutoCAD is acting up, and its getting late so I will post the other piece tomorrow in this thread. But if you want to quote the first piece, by all means.
First Piece (Part # 001)
Material - 6061 Aluminum
Units - Inches
Tolerances - +/- 0.01" (Except the 8mm hole & 1/2-20 RH thread, need to be exact)
Turn Around - Sooner is good, but cheaper is...
Sorry guys, just realized that this design will not work. I will redesign and repost a new thread.
Thank you to those who did quote.
Material - Steel (does not matter, what ever is cheapest. A36?)
Units - Centimeters
Quantity - 1 (Possible random reoccurring orders of various sizes if allowable)
Turn Around - ASAP
Explanations...
Just wanted to give Bob & Steelwright Products a good review. Just got in some parts in today. Quality work at a great price.
Thanks again.. :cheers:
RFQ has been filled. Thank you for the bids.
Looking to have 4 different designs of bushings & cups turned. I would like an RFQ of these Designs & Quantities in each of these materials; Nylon, Acetal Delrin & 6061-Aluminum
Design # 001:...