Hello friend, our company also uses the A11 control system, and often encounters such problems. Usually we will connect the handle to the computer. If the handle displays the interface normally,...
Type: Posts; User: ACCTEK-Barry
Hello friend, our company also uses the A11 control system, and often encounters such problems. Usually we will connect the handle to the computer. If the handle displays the interface normally,...
i have the same idea as rui-sjm1
our conpany use Ruida conrtrol system for our machine too
The most likely situation you encounter is that the step parameter of the motor changes due to resetting...
Hi friend
our company also use fuling inverter,the alarm E004 means that the spindle is overcurrent during acceleration, which is usually caused by the short circuit between the spindle and the...
If your control system is A1X,you can follow this friend,hope it could be helpfull for you
Machine parameter-maximum speed setting: This parameter is the maximum setting of processing speed, does...
Our company is located in Jinan, which is a very famous foreign trade company in Jinan. We have the 6090 laser machine you need. If you are interested, you can search ACCTEK to learn about our...
Our company is located in Jinan, which is a very famous foreign trade company in Jinan. We have the 6090 laser machine you need. If you are interested, you can search ACCTEK to learn about our...
Friends, you can contact your purchaser. They should have a circuit diagram to check the circuit. They should also have the driving parameter settings and troubleshooting methods. Hope itcould help...
Is this the first time the machine start work?If it is ,maybe the moter step parameters is not correct.
Hope it would be helpful
Hi friend ,so we can make sure that the laser PSU is normal
I suggest check the the high voltage cable
Maybe you have a loss in the high voltage cable.
hope it could be helpful
Hello friend, do you need the machine to perform automatic tool change? Hope I understood nothing wrong. If so, you need to make sure your machine supports tool change operations. What software are...