I got the HT210 off the website dimensions so I'm pretty sure its a 210.
Do you use the part diameter or the table diameter? I set it up as 8.5 inches but the website says 8.27.
Thanks for the...
Type: Posts; User: Darth Yoda
I got the HT210 off the website dimensions so I'm pretty sure its a 210.
Do you use the part diameter or the table diameter? I set it up as 8.5 inches but the website says 8.27.
Thanks for the...
Quick update....
I named the file
partnumber 9/16 hole and it messed up. Renamed the file and rebooted and did the same thing.
After I deleted the files (both g code and part file) and rebooted...
I 'm haveing a problem where X7 tries to double save Gcode then only posts the first tool.
I have a HASP type setup will full Mill and lathe features.
This has happened before and required a full...
Hi guys.
I'm trying to set up an HT210 on a VF-3. I can get it hooked up and moving but I get an error something like "distance to go".
I've found a few responses that say subtract .118 from the...
Hi guys.
I have moved to a new shop with 2 unused WFL M35's.
Would anyone have a Post Processor for WFL M35-g using Mastercam X7?
Really appreciate the help.
Yoda
After a series of long delays, the school I work for has decided to expand our machining shop.
We are looking for 8 lathes, 8 mills, a surface grinder, and other tools that may pop up along the...
I'm looking for what everyone thinks are the best machines for the buck. They will be used in a training environment and in a smaller footprint.
Mills?
Lathes?
Surface grinders?
Drill press?
...
I m using MC7 to make some .3125 wide slots. A four flute uncoated .3125 carbide endmill 1. inch.deep. I have broken 3 endmills going from 2650 rpm to 3500 rpm at around 5 ipm (full depth) in A36...
317898
I have this part I need to program. it is clamped in a vice and leveled along the tan line. There are 2 jacks supporting it below the red and purple dots.
I am going to the landing where the...
Thanks for the reply TXFred. I did that but didnt like the results. Ended up making a 45 degree jig.
Hi guys.
I have X7 and am trying to put a chamfer on a 1.5 inch plate. I need a 1 X 1 45* chamfer.
Problem is, my tool is an inserted carbide, .914 at the big end and .188 at the bottom. I can...
I recently loaded a SAT file into X9. It came in OK but when I click a line the whole surface is selected. How can I choose a single line?
Also how can I change it from wire frame to solid?
Could you use a "big" ball mill to rough it to an oversized (over thick?) letter then use the taper of the engraver to get the draft angle?
I am about to try this same thing so I am very...
If a person was to make a custom letter stamp, what material and hardness should it be?
Hi guys.
I have a Thermolyne 3f-A1850 oven that is bonkers.
It heats up to 900 degrees quickly then stops for a while then shoots up to 2200.
Three questions:
1) Are repair parts available? I...
Im looking for a supplier of 3" to 4" 4140 or other heat treatable (D2, A2, O1) metal in the Dallas or Oklahoma city area. Type isnt really a concern. Its for some jigs about 4x4x3. About 8 pieces...
288526288528288530
Here are a few shots. The shape isn't important but the floor slope is.
How can I create a slanted pocket in X7? I have block that is about 4x4 and needs a 1x1 pocket in the center. The pocket should be .500 deep on the +X side and zero depth on the -X side.
If using a...
I am trying to grind in a soft magnetic V block with no success. I do not have a reliable v block for set up purposes so I have to clamp it in a vice or use another method.
What suggestions do you...
CNC Programming Handbook by Peter Smid. It has very good text and examples.
Looks like Mach 3 is used by many of the not-quite-production crew. (No offense intended!)
Which process would be best suited to do the 45 degree angles of a v-block? It is already roughed out, just need a finish path with a 1/4 ballnose endmill.
Looks like the machine was on or very close to the Z soft limit but wasn't throwing an error.
Changed my style of doing things and it seems to be working.
I started completely over with the...
I am actually using 6" height of the 123 blocks.
I had an epiphany this weekend. My vice is very high. About 8 inches. This results in the empty spindle being below part ZERO. That might cause a...
Hi guys.
I need a bit of help on setting tool heights on a Fanuc Oi-MC mill.Yesterday I ran some parts and broke a tool. Put a new tool in and measured it by touching top of part, pressing offset...
I have a Sandvik Coromant R215.2-320 cutter that I measure at .803 inch. That size does match to any english or metric size. Is that the correct size? And does it have 90* sides?
Do you see a good amount of coolant coming up and out of the hole to help flush chips out? That deep you would need a ton of coolant.
Do the chips have a place to evacuate?
Might be out of my...
Got a buddy from Xtreme Idiots named Rugger. Thought it might be you. If you swap the letters in your name........
Rugger? Not from XI?
The dynamic area does use trichoidal. But I went ahead and tried to do a full depth cut...........actually .600 and it worked OK.
THANKS!!!!!!
Anyone have or know of some good videos for the taper attachment and its use? Also can it be modified to do profile cutting?
Thanks again guy!!!
Darth