Search:

Double the feed as when you drive in -> that's the basic condition and from there onwards try out what's best...

Have a look what happens in the display Diamon/Diamoff when you press Reset.
You find the display in the active G codes.
I guess DIAMOFF is defined in the ResetMode.

Hello
Is the problem new or since you have the machine?
I would be careful with the MDs but it might be a possibility.

Regards
Stefan

@hapo
It goes in the ‘Plus’ direction if I read it correctly and there is also the duck in Shopturn... that doesn’t work... then my machine always complains about the processing direction!
The Help...

Hello

That is possible, but as far as I know only under particular drive requirements. If anybody knows more please let me know.

Regards
Stefan

Hello
I guess that the previous owner cancelled it in the machine date- because when the machine only knows 1 and 0, then the regulation is missing.

So there is only the possibility that the MD...

Hello Christi,
What sense would that have?

Regards Stefan

Just get a new lubrication system. The time you already wasted to look for a solution stand in no relation to the costs.
Also that would solve your spare part problem.
By the way, I never...

Hello
I want to curb the drive engines of a machine… so that the machine would stop in case of a collision and not until the emergency stop button is pressing.
My question: Is it possible to change...

Hello martin
It depends how big your parts are but generally when the programs are designed so that the roughing tools are kept in place and are run under either number of pieces or running time, it...

Hello

Have you thought about a M command at the end of your first program?
To the pallet change… occasionally there no M30 .

Regards Stefan

I think Michael is correct... not only the nut can have a problem- also the ball screw could be damaged as its also only a wearing part.
Its also question of the machine’s age...

Regards Stefan

Hello

I don’t know your machine but I would only position the spindle in the program to the desired degree and then push with an adequate slotting tool. wink.gif
(path programming in iso or in...

hello @all

I should add that you need an own XP license for vista VM …. unless it has changed.
Only Win7 virtual machine has a free XP license.

However I have to say I find it really sad that...

Hello

First of all a question to you: is the turning steel possibly with a plate?
If the answer is yes then I am able to explain your question..However I don’t know if the simple ones are curved...

Hello
I think a retrofit for the machine wouldn’t be manageable , i would consider a new machine or at least a second hand one for example a Deckel FP4 or something similar...I believe that would...

I can only agree with Boern. Blotting paper system with cast iron is very useful- otherwise the dust can damages the hinges of the conveyor.

It depend what material are being grinded!

Hello

My advice would be to try out something from the drilling machine. There are steel wire attachments or rounds of sand paper with dowel pins for the drilling chuck.
You can clamp them...

Hello Slater
Maybe the beginning helps you:
I had the same problem with my Spinner... have a look at the top left in the control box ( that where it’s located on my machine) there are 2/3 yellow...

Hello woaldy,
First of all: what do you plan to do? I only know it when you use for example a gear cutter on a machine which needs to work in a particular spindle direction.
Have you tried the...

hello Schura,
I have worked with a Stama before and I need to tell you that your plan doesn’t work there.
I don’t know if your write your programs in Stama in surface or parameter, like we did it....

HelloDMC,

So according to that you would need to write in theory 10 raw part contours in order to isolate 10 horizontal contour elements. That’s how I know it at least from the software version...

Hello Roman,
I can confirm the contour display in Pilot4290: I have worked with it myself but as far as I know with Shopturn there no other possibility than constructing a single contour each.
If...

Hallo enrico,

I am not so familiar with the transmit programming in Shopturn. Also the machine has no proper y axle what I believe makes everything even more complicated.

Just in case I need it...

Hello everybody,
i process only plastics of all kinds. What I would recommend are Diamond end mills: they combine 3 things at the same time: big clearance angle, high cutting values and clear milled...

Hello everybody,
I have a spinner machine with Shopturn V.7.20…

I tried to mill a longitudinal slot on the rear side but I had several problems:
First of all, I couldn’t construct an angle...