Mr. Sidique,
Try following steps.
1. While homing as you say X axis goes in wrong direction, let it go for a small distance.
2. touch the X limit switch manually with any metal object (like a...
Type: Posts; User: Snehal_Shah
Mr. Sidique,
Try following steps.
1. While homing as you say X axis goes in wrong direction, let it go for a small distance.
2. touch the X limit switch manually with any metal object (like a...
Hi Abel. It seems that machine is not sensing the sensor plates.
Ideally when you start the machine and select "home", it will home Z first. Once Z is home position, it will go for X & Y home...
Hi Jason Li.
I have some issues using NK105 G2, but the e-mail address that you mentioned seems to be wrong/unavailable. The mail returns undelivered, please give me alternate mail address or send a...
My bit is HSS (2 flutes) which seems to be the root cause.
The chip load with current parameters is 0.017", is it too high? I would surely try out lower feedrate and higher rpm in accordance with...
Hello guys,
I am having issues while doing V bit engraving in wooden parts on my CNC (a Chinese one).
Following are the parameters set while machining.
Feed rate: 200 ipm
RPM: 5000-6000
Tool:...