There is what appears to be some kind of play at the shaft of the screws near the motor mount. Video shows it pretty clearly, so what happens is the axis doesn't move for a second during direction...
Type: Posts; User: cetagloh454
There is what appears to be some kind of play at the shaft of the screws near the motor mount. Video shows it pretty clearly, so what happens is the axis doesn't move for a second during direction...
Awesome, thanks for all the info guys. This definitely helps. I am totally new to the CNC world, so I am learning lots daily. -Paul
I've spent hours reading and trying various ways to "home" my axis's on a newly CNC converted G0704 mill. I've successfully tuned the motors and can jog them around. I do not have mechanical...
Another question(s):
The c11G has a jumper for "IEEE1284 Compatible". I don't know if this should be set to "Compatible" or "Not compatible". It simply says that some motion controllers are not...
Thanks for the info and explanation. I used the UC100 as it was commonly used on this conversion, based on a lot of the research I did prior to sourcing parts for this conversion, so I went for it. ...
Hello All -
I recently completed the physical CNC conversion on my G0704. I am running into some troubles getting everything wired correctly. I am trying to just wire up one driver/motor at...