Interesting, your first line seems quite excessive as to the codes used. Do you need to specify all those codes to your machine?
I can only say to you I would write it something like this.
...
Type: Posts; User: Kodamadrw
Interesting, your first line seems quite excessive as to the codes used. Do you need to specify all those codes to your machine?
I can only say to you I would write it something like this.
...
I have had this happen twice now on my Sharp machine. I have tool 5, want it in empty tool 4 spot, put in "M6 T4" with the tool in the spindle, decides it is going to carousel location 2 (which has a...
I personally just started using a Sharp machine. Honestly the biggest issue i have had is with the tool carousel. Sometimes when i go to do a tool change in MDI it brings up the wrong tool location...
I am currently working with a sharp machine. I know what you are talking about with the rotation down then back up. Maybe your machine is setup to use a Q value each time....I'm not sure.
The way i...
So as I was leaving work on Friday, my machine set an alarm I have never seen.
"Magazine home sign missing"
Any ideas?
Thanks.
Sent from my XT1060 using Tapatalk
Hello there folks.
I was given the wonderful opportunity by a friend to start my career in CNC operating and G-M code programming.
I had no experience in this field, however I have been a...