How did you send it? I have not received anything
Type: Posts; User: cncmm
How did you send it? I have not received anything
MKU,
I have a constants list for 603 level software. It should get you close but you may have to enter some manually.
If you want them send me an email address.
Doug check your Hotmail account I just send you the schematics for the 103V. I have almost all the manuals for the 013's in PDF format.
If you need operator, programming, startup, etc manuals let me...
Young Technologies, talk to Jerry he'll have a copy of the constants.
https://youngtechinc.com/
If you're using the network to communicate with the machine your settings are wrong. Compare your picture #2 to the picture I've attached .........
401030
Good Luck
I spent 20 hours trying get DNC Plus to communicate with my network and I was VERY VERY unsuccessful !
We use cdslite and it works great. you can upload or download.
311=C0
313=C100
I am not using DNC PLus to load programs. I use CDSlite
Lime-a-Away......factory techs use it.
Did you receive the Drop box link I sent you to the electrical schematics ???????
The M01 error is a "checksum error machine constant memory" (RAM memory)
Hopefully you have a copy on the constants for your machine and the software level it's at.
Pull the RAM memory board let...
Give me a couple of days and I'll scan my schems for you.
I have to ask; Why do you want to change to a Siemens control? I have two DMG 103V's with Siemens controls and I like the Phillips,...
Did you get the electrical schematics you needed? I have an 800C 4 axis (baxis) NO tool changer. Swivel head NOT M code programmable for the swivel.
My machine is a 1986.
If I can help you out let...
You original board may be fine. The battery my be going bad and you lost some of the machine constants. A POOR BATTERY CAN DO VERY STRANGE THINGS!
I've been using ZW3D since it's been ZW and Varimetrics before it was ZW. Started with this fine product in 1996 AND THERE HAS NEVER EVER EVER BEEN ANY MANUALS THAT WERE WORTH THE paper or cyber...
Take a look at the picture it should help you locate the network cable.
send me an email address and i'll send the picture to you full size
http://i64.tinypic.com/2dbwegn.jpg
If you want to use RS232 you will need a USB to RS232 converter cable.
usb to rs-232 db9 serial converter | eBay
I would just use the network connection and plug the 103 into your router. The...
What control does your machine have? If it is a Siemens there is a network connection and 2 RS232 ports. You can use any of them to transfer programs. We use the network connection.
If the control...
Nash,
Bart and I have had some email conversation. His 103 has a Heidenhain control and I did sent him a Heidenhain control manual I had.
Sure would be nice if we had that manual in English! !!
Take a look at ZW3D.......some very serious bang for the buck.
I spend 2 days trying to get the NFS working on our DMU80P with absolutely no success! I'm using the CDS Lite Heidenhain communications program to load U/L and D/L through our network. It was...
It's constant 773 DIO: block numbers > 9000 (0=off,1=on) .......Check it, probably a 0 now change it to a 1. Our Millplus is version 410 and constant 773 is 1
GOOD LUCK.
Look at your machine constants there is a constant that allows line #'s > 9500. I'm at home and don't have a list to check.
Hi
The correct battery for the Phillips -9 control (the control in the picture) is a 6 volt gel cell. The -9 control had the battery in the power supply. I'm not sure what setup you have now but you...
Looking good! How do you program? At the machine or a CAM system. If you need some programs to see the format I'd b be happy to send you some. We use the Siemens cycle formats, not the DMG.
No I have the electrical docs for our machines, but thanks for asking. WOW that heat ex-changer is dirty!
Hi, you're going to like the 103. We have 2 of them a 1999 and 2001. I have the manuals you're looking for. I'll have to check but I'm pretty sure all of them in PDF format.
Did you get the...
you need to press the hydraulics start button, hold it down and press the "clear" button on the keyboard, release them and do it again. It has to be done within 3 seconds of each other. IE:hydraulics...
Bill, I tried to send you an [email protected] got kicked back.
Is that a good email address?