Ya I figured it was something like that it is just weird that it is doing it on only DNC run and not with DNC fast for reading from memory.
Type: Posts; User: Sharab85
Ya I figured it was something like that it is just weird that it is doing it on only DNC run and not with DNC fast for reading from memory.
Well figure out one problem find another. It turns out that it is the DNC fast that is skipping the drill cycle, I ran it DNC run and loaded it into memory and they they both run cycle fine but DNC...
Ya the drill cycle is after some adaptive clearing that reduced the z height to start the drilling. The program is 100kb and my parts storage is a little over 150kb but I almost crashed system by...
Here is the section for the drill cycle.
(DRILL2)
M6
N17235 T5 M6
N17240 S4200 M3
N17245 G54
N17250 M7
N17255 G0 X3.3 Y-2.0625
N17260 G43 Z0.59 H5
I am slowly getting used to this new to me mill, a partner 3 with centurion 6 control. I have been doing programs that could fit in ram memory but recently tried my hand at DNC Drip feeding the...
Here is the table I came up with
Thanks rl49!
I entered the info into the ballscrew comp table, turned ball screw comp on and re-homed the machine but there is no difference in measurements it seems to be not using the table. I...
Here are some updates on my progress with this mill if anyone is interested.
I had been having problems with accessing the conversational programing part of the centurion 6 software. I had...
Thanks!
Wow that is awesome!! I did not know that existed.
I would still like to see what a stock tool change command looks like so I know what to tell the program to insert.
Thanks again pastaman!
Hello,
Could someone with the pro version of fusion 360 post some script with a manual tool change in it?
I have the free version that does no allow even manual tool changes to be posted as...
Good advice tried another indicator and all was well.
Ok well I think I got the homing problem fixed I pulled the cover on encoder and cleaned disk and it is homing and finding marker pulse very reliably.
Now moving into verifying accuracy I am have...
Ya it does go forward a little then back so it is definitely looking for marker, I slowed move to marker setting and it seemed to help but I still never see the marker trigger on diagnosis page, the...
Well I figured I would keep updating this if someone else was having this problem. After taking with millitronics guy ( I still can’t believe they are willing to try and help me with a machine they...
Here are the promised pictures.
The order in which it faults out is: z is homed y is homed x is homed y starts creeping back towards operator until it hits hard stop and triggers estop. I can hold...
I got this machine for a good price because it was not working, the machine is in great shape and it turned out the problem was just a misplaced wire. Almost everything is working great except...