Double check the isolation of your wiring and add some more (for test). You could also try to clean the surface of the tube to remove any possible conductive stuff from it...
Hope you get your...
Type: Posts; User: notexpert
Double check the isolation of your wiring and add some more (for test). You could also try to clean the surface of the tube to remove any possible conductive stuff from it...
Hope you get your...
Malagant,
Remove the foam rubber from your machine - I think it causes your problem...
-Hannu
Sounds like your laser beam is out of alignment... ? You should check the beam way from the first mirror to the last one.
Just guessing - regards,
Hannu
Are you sure you've set vector mode (not raster) with the red hairline for cutting ??
- Hannu
Thank you Rodney,
This was also new information for me - I read somewhere that the pen settings use only RGB-colors on GCC driver...:confused: I've also had some troubles with my pen settings, so...
Just guessing, but check your red hairline color - it should be RGB 255-0-0. Other color settings might cause problems on GCC driver...
Regards,
Hannu
bpoulin,
Here is the table of scan gap settings. For example from the table; 100dpi is 0,254 - 300dpi is 0,085 - etc...
Regards,
Hannu
bpoulin,
Attached is a professional schema :D
Hannu
Zax is right,
In this case you don't need neutral. If you can't use your "chinese" plug, simply cut the wire and use your own ( I don't know what kind plug you use in US ), leave the neutral away...
Tomislav,
Look here; NEWS | LITOGRAFA : GLOBAL VIEW - LOCAL TOUCH
Might be a good choice for you ?
Regards,
Hannu
I use mainly CorelDraw and Adobe Illustrator. Somehow I feel it's easier to explode PDF files with Illustrator and I'll also get better tracing results with it.
From Adobe it is easy to export the...
I don't know if this will help you at any way... ?
Regards,
Hannu
Litografa, you are right about the position - and it will only need a small hit on it to get out of align, so you have to check the position quite often. But it still work nicely showing the position...
Hi guys,
Here is one home made option for the red dot. Costs all together app. € 25,- ($ 33,-) including the laser module. The power source for the module is two AA-battery in serial (3V) with a...
[QUOTE=lout63;875253]Hi all.... My name is Lou and im an alcoholic (crap.... This isnt A&A????)
:cheers: to that :D
Happy New Year guys !!
This is funny, at the moment I'm living in 2011 (in Finland) while you're still in 2010 (in America)...:D
Zax, great cookies !
Best regards,
Hannu
Hello Busola,
I understand your situation and I don't want to be suspicious of what you are saying. If the case is just so that you've ordered something from the dealer and paid it upfront and you...
Busola,
Are you absolutely sure your statement is the only truth in this case ? I've done some business with Litografa without any problems. Ok, we had a little miss understanding with one...
Tweakie,
Thanks anyway - hopefully Ferry will find the right way :) The latex I haven't tested, but I will as soon as I'll find it somewhere ( in fact I asked my wife to visit with me in one...
Thanks Tweakie,
About the link you put here ( Laser protection ), do you know any dealer in Europe ? I tried to search but didn't find any... that would be interesting stuff to test !
Regards,...
Here is one test on acrylic I did yesterday. I filled the engraving with the acrylic paint and then just viped the surface quickly with a soft towel.
Regards,
Hannu
I have used 3M SCPS-100 Aplication tape for the color filling on acrylic, wood, granite (actually granite doesn't need any... ) and mdf with some good results. I think that where you could find your...
I've just tested NOVUS cleaners for acrylic and seems that those will give the best results without harming the acrylic in anyway... All of the residues after cutting are easily wiped off with...
Zax is absolutely right,
The marine ply is propably the worst you can use... For the laser the best ply is ( for cutting ) INT-clued and the worst is EXT-clued ( interior / exterior ) but for some...
I think that Dave's words "I am not professional, just hobby" have to be replace with "I am not amateur, just professional" - your clock is awesome ! As well Myrko's table ! Myrko; how deep is your...
Thank you Zax !
- Hannu
In fact, never even heard about them - thanks a lot !! I'll take a look and in case I'll find some other suppliers I'll put them here !
- Hannu
Zax,
Mostly laserable plastics, laserable aluminium, wooden items and some tools like corner cutters and beveliers. USA suppliers are also possible for me but because the distance between us is a...
Does anyone know any reliable supplier in Europe - like in UK, Germany, etc ? At the moment I have a bad feeling I've been cheated by my current supplier :mad: If this comes out true, I will put here...
Dubliner,
You should be able to set the DPI in your print driver ( DPI = Scan gap ). Attached you'll find the table of the settings ( I've copyed it earlier from this forum ). I have Lasercut 5.1...