I have Panasonic A5 servo drive the type is MEDHT4430NA1
This servo has the X4 plug smaller then in the drawing
Is someone can get me the drawing of this plug
Type: Posts; User: dango
I have Panasonic A5 servo drive the type is MEDHT4430NA1
This servo has the X4 plug smaller then in the drawing
Is someone can get me the drawing of this plug
Thank you
I have Panasonic servo drive 2kw can I connect it to
750w Panasonic motor
Did someone know the size of this poly chain belt
I am looking for graziano 22 spindle bearing is someone know bearing number and where can I bought them
Thanks
Dango
Is someone where can I buy lathe for metal working on the field it came with electric magnet
This is Micro-Rib V-Belt (31.5") A-315K10 A-315K10
I bought it from Tired Iron
Make a serach there
The belt cost about something like 10 dolar
I in israel order it from the state and way less
Then the price that you write
If you wants I can give you everything that I know about it
I have Haas UMC 750 and I have a problem with the main CPU card
Is there is someone here that know a repair service that I can send it
New one cost about 3500$
I need Someone trustworthy
This is a lathe that have hydraulic oil gear change
The oil pump sitting under not center motor wheel inside the gear
Now it not working I bought new one but it not working is someone upgrade...
I cleaning my warehouse in couple of days
I will put in Ebay some Cazeneuve parts
I also can get any parts that you need for
Cazeneuve you can put your request here
or write me at...
I have 4020 fanuc 18i and when I start I got the above error I think it came from the hi-lo sensor
how I can check the sensor in fanuc diagnostic
Hardinge Conquest T 42 ballscrew end disassemble
Did someone know how to take out the bearing in the ballscrew
One of the part does not come out
I know that they put Loctite but maybe I make...
everything what you need is on the pendant door
I have a Frank Phoenix old CNC machine
the driver there is MDD103A1ve and one of them is defective and it can not be repaired
the motor is Panasonic MDM102A1G
did someone has the manual of the...
From what I understand this is baldor 180
In the keypad press
Local then program
Then go down till you see
Level 2 block press enter
Go down with the till you have on the screen
Auto tunning...
First you need to tell us the type of baldor 170 175 or 180
Then I can tell you how to make self test
We are using fanuc 18i
Thanks
first take your tool and put around the pullstud Plasticine this is kids stuf
then insert the tool and lock it then release and observe the pullstud
how deep the holder hold the tool in our machine...
this MV 40/45 came with pully with belts and I wants to disassemble
the spindle
but I can not figure who to pull out the pully
did someone know who can I LIFT THE PULLY
Is your MORI is with a gear
We have 4 mori 2 with gear the one with the gear dropping tool
So we made some modification to the drawbar
If you wants I will try to find what we made it was 2 years...
I have problem connecting the Live Tooling
I am looking for wirring drawing
I have problem connecting live tooling
M53 or M54 connect the motor and the coolant
when the command line in my program is M53 or M54 it connecting
the coolant but the live tooling not I does not...
When I load tool in the spinndle the
Tool is loose
The machine is Komo 508
Did someone know how to disassemble the drawbar
The spindle is BT 30
I think the problem in the spring
Thanks
Dango
I done UT if I done exactly the way is fail
If I do opposite it O.K.,
We have in our VMC15 TS27 probe that was hang on the side
We tried to work with it
But when nothing touch the probe it said on the screen that is touching
When we push it not touching it seem...
thank you very much for the help
my motor number is A06B-0127-B077
I got offer for A06B-0127-B577
could someone explain me the diffrence
and the last 4 number what it mean
I am looking for the Z and the X screw and nut
in Israel the dealer ask for it about 10000 $
can i bought that in the state i have a logistic center here
so I wants to try to buy it here
can...
I got problem with x axis ballscrew
could someone tell me where can I find
this ballscrew since the size of the nut is special