Search:

guess I'm going to look for another printer or some other methods to simplify the PCB production. It did cost me only about 6USD anyway + shipping 5$.

Anyway thanks for help John, at least you...

Cartridges were removed just for taking a picture.
The cleaning station including pump is still on the right side and as far as I can see it still works correctly. I can see the sucked out ink...

correct

yes

they are separate but not connected by the tubes I mentioned before.see picture. The tube I saw ink movement in was more like a drain pipe which is used to guide away the residual...

I screwed it up about a year ago, but it was working just few hours/days before that. So it can't be caused by dry ink. However it might be clogged now, when I started convert it again.

Hi John,
It was a while ago but I remember it working. There might have been some spots missing on the test page, but overall it was working. After assembling there was absolutely no print on the...

Seems that I have to buy a new printer(chair)
I had planned to make a cnc drill for a while, maybe I'll convert it to this instead:idea:

I've just checked the ribbon cable and it works well. Does anybody have any idea what could cause this?

Hi all
I started to convert my R200 printer. I don't remember why but a while ago I opened up the print head. I disconnected the ribbon cables then plugged them back in. After that the printer...

Has anyone tried it?
"Liquid Gel is a remarkable alternative to traditional colour laser and ink jet printing. The viscous ink is a fast drying, water resistant formula that reduces blurs and...