Your Acorn needs to have a bare minimum setting for "steps per revolution" of 1600. For your Acorn/Clearpath combo I'd set them both to 3200. I have mine both set to 3200. Change the motors steps per...
Type: Posts; User: Shawn_M
Your Acorn needs to have a bare minimum setting for "steps per revolution" of 1600. For your Acorn/Clearpath combo I'd set them both to 3200. I have mine both set to 3200. Change the motors steps per...
I posted in the classifieds that I have a WinCNC 3.0 control card set and THC I/O board for sale. Pulled from a working ShopSabre Sidekick 10 plasma table for upgrade. Check it out if interested.
...
I have for sale a complete WINCNC 3.0 control card set with a THC IO board with all the cables , manual and license CD pulled from a 2019 ShopSabre plasma table.
All equipment was working when...
All items sold, thanks for your interest.
And I have a new, lower price just to get it off my desk if you are still interested. :-)
Shawn
Hi Ahmed, yes I still have them. I sold everything else and put the VFD and spindle in a box and forgot about it.
All items sold except for the spindle, bracket and VFD.
Sorry for not replying earlier, the PVC board can be bought at Home Depot and Lowes. I had some laying around from a previous job. It works awesome as it can withstand any cutting fluid I may use...
I recently upgraded a large 6x12 cnc machine and have a lot of parts to get rid of for the owner.
1 - Fuling DZB200B002.2L2DK with CAT5 cable for remote mounting control panel if needed $150...
I forgot to update this post, the machine was sold. Thanks
I too am an actual user of the Rev 4 Acorn board. I can second everything Ntl stated. I recently (within the last month) converted a Chinese Blue Elephant 6090 CNC router I bought used on Craigslist...
I have an older Dell Optiplex with an i3 processor running win10 on a 120GB SSD drive with 4GB of RAM running my new Acorn setup and it's nothing short of AMAZING. Why people still use Mach3 is...
Ok, lowering the price to $2500. You can't build this 6040 2.2kw machine for this price and all the hard work is complete. My new machine is here and this one needs to go. Make any REASONABLE offer....
Hi everyone, I am selling my completely overhauled HY-6040 machine because I just bought a larger 6090 machine.
This is a HY-6040 CNC machine from China that has been completely overhauled with...
Well Google saved the day for me. After an exhaustive search and lots of reading I found a post where someone mentioned turning off "CV Feed Rate" in the setting page off, this did the trick.
I have a modified HY-6040 machine running with new stepper motors and a G540 with Mach3 and Cut 2D software. My cuts are also excellent but for the life of me I cannot figure out why I also have a...