Search:

Hello,
I'm considering buying Pulsar MK2. However i'm not finding allot of reviews/comments/you tube video's, and the little bit i am finding makes me concerned. I have a small Part time Prototype...

Hey all, thanks for the responces! I came across an old post that gave me the solution! while its hung up on generating the toolpath, press reset, then regen toolpath, and there it is!

AWESOME!! similar problem, really did want to re-install MACH3, no internet out in the shop(yet). RESET, REGEN worked!!!!!!!!!! back in business! THANKS!

I produce G code either through Fusion360 or manually write it in notepad. My MACH3 software is not working as it always has and i don't know why. I suspect i need to un-install/re-install MACH3...

Hello, MACH3 wont generate a toolpath. top right screen is light gray? restarted several times, it will ref all home fine, it will open and display the program, but hang up on generating toolpath. i...

Use the torchmate post. modify it to fire the torch with M3 and M5 instead of M50 and M51

Hello, Got this error message at boot up, attempted recovery over and over but it did not work. Did a Windows system restore, 2 a couple months prior, no luck. Replaced/Copied/renamed an old .xml...

Working nice, took a while, but running sweet now. Use the Torchmate Post in CAM, change the M50, M51 to M3, M5

Trying to drive my MACH3 CNC plasma machiine with Fusion360 "cutting" machining option. it gives me the lead in features i need. but when i try to post process it it fails???? I've posted many 3d...

Anyone ever get a Primeweld 50A to work on a DIY CNC Plasma Table without the EMI causing unexpected stepper movement? I added many countermeasures which made big improvements, but not 100% gone. NC...

Switched from PNP prox's to microswitchs, wired NO with shielded 22awg 2 conductor cable. tied the shield on the cabinet end to earth ground. when I view the Mach3 diagnostics screen, the input pins...

Get M03 and M05 firing the relay!!! except........pc goes blank for a couple seconds, z axis motor starts to move with no command, mach3 resets??? plug plasma in to its own oulet, isolate plasma work...

I can't back off a limit switch once its hit.???????? PNP NO proxs, xyz+ wired in parallel, shared input, xyz- each have an input, but its a shared limit/home switch. input resistor set to pull down....

Hello, having similar problem where I can't clear the reset when I one of limits is met. using PNP NO proxs, xyz+ wired in parallel on a common input, xyz- all have there own input, but its a shared...

relay driver circuit has 3 connections, plus and minus power and input signal. C10 board has a number and ground(2 connections).

So i'm planning to connect +-5vdc from my 5vdc powering the Board....

hello,
using PNP prox's for limits and home switch's with input ports on a C10 breakout board. Do I set the jumper to pull up or pull down?

THANKS!

on the final steps of my cnc plasma machine. 4'x4' gantry machine, rack n pinion/stepper/C10 breakout/Mach 3, with the gantry axis driven by 2 steppers, one slaved spinning in reverse. Had everything...

is Fastcam Outline any good? Anobody used it with Cambam?

Thanks for the quick reply. will Cambam open a .cdr file? is corel draw a good software for decorative text/artwork? is adobe better? are there others?any recommendations?

Hello,
I'm new to the site so here's a general question: How do you start a new thread, or simply post a general question?

On to the question: I'm all set with using CAD software for the DXF,...

Man, should have asked the question days ago..........

That worked perfect! Thanks so much!

I’ve got 2 opposing steppers on the Y axis, each with their owndriver, with one being a slaved axis in mach3. Each has its own Stepper driver, driven by a C10 Breakout board.


I need to make one...