did you eventually figured this out?
Type: Posts; User: SparkyNL
did you eventually figured this out?
yes exactkt the 8 pin connector,
attached are the following colors:
red
orange
yellow
blue
green
Do you mean a PIC processor by Microchip?
And what do you mean by "lost it's key"?
I am familar with PIC processors but not with 3020/3040 CNC machines
sorry it is not a 9 but a 8 pin connector like this :
http://www.cnczone.com/forums/attachment.php?attachmentid=381582&stc=1
This is the actual connector:
http://www.cnczone.com/forums/attachment.php?attachmentid=381576&stc=1
Thank you very much in advance!!!
does anyone have a diagram of Mitutoyo linear scale model AT112 using a 9 pins round plug?
I need to match it to a KS series DRO that uses a 15 pin RS232 type connector
It is very difficult to...
I am running into the same problem : could you please post any information on this topic please?
Hi All,
I aquired two Philips series 2500 DRO's (one double and one triple axes) with PE2580 heads.
I have tried to find information on these older DRO's but that is very limited. Is there...
it looks dormit welderszone.com
Hi Mike,
Could you at least fix the incorrect URL reference in the Forum overview paga? So that this question won't be asked again?
Would or could it be possible to make welding or welder...
Is welderzone.com up and running?
Seems that this site refers you to welderzone.com that looks like a parked URL?
Thnx
Hi All,
my PI8600 shows the following at startup
EoCP
which is apprantly an Error Over Current Protection
I have used the following User Manual
it seems like there use to be a simple transistor with B C E leads. These things were used to easily change a defect transistor but that seems to contradict the rest of the print that is sealed in...