Search:

Hello Guys
I started toying around with my 3 axis Chinese CNC, looking to engrave thin sheet of birch wood not more then 2mm thick. I need to make sharp corners- 0.6mm at most but preferred 0.4mm
....

Hi guys

Im experienced some issue with my CNC,
thats a Chinese machine controlled by a Gecko G540 and Mach4 (using Darwin plugin) .

Im experienced 2 issues:
1. My axis wont automatically...

Hi guys
Im looking for a decent VFD cable, forund several sites but shipping charges are just too high to my address,
i came across several cables ob Aliexpress:
...

Hello
I own the Gecko G540 controller, and wondering about limit switches- i have a 3 axis CNC machine with limit switches (they actually installed a momentary push button- N/O)- while i see...

Hi guys
I'm in the process of modifying 6040 machine
while rewire the 3 axis stepper motors for shielded wires I came across a question
where should I connect the grounded lead, or should I ask-...

Hello everybody

Just got a winXP pc to run my CNC with no parallel port cnc. my Chinese CNC will work with gecko g540

I found on Aliexpress several parallel port cards, any I'm not an expert...

Hello guys
I own a 6040 CNC machine which I'm using (still leaning..) to cut thin 2-3mm plywood and 3mm styrene.
My questions for you today is: what would be right way to engrave the materials,...

I can find 65mm 1.5kw spindles online, then again, it may be only 800w?

Hello guys
been looking for a 65mm (what my machine's bracket came with..) spindle. as far as I see, 1.5kw is the most powerful I can find at a 65mm diameter.
I asked a seller at Aliexpress about...

Hi everybody

Just received my 6040 frame which I have ordered from Aliexpress (stepper motor included)
frame came with a 65mm spindle collet, and I'm struggling to find way to mount 80mm bracket...