Search:

Ok i will reduce the velocity down to 15% and see how that goes with the rapid FRO% at 100

Thanks
Karl

Hi Guys

After checking everything voltages cables it was the Rapid FRO% setting i reduced it from 100% to 15% and returned the motors settings back to how they were and it worked perfect i just...

Hi Mactec54

I have a mate coming over tues he is a sparky and has all the gear to test it
after testing will go from there

Thanks
Karl

Hi Mactec54

I am not 100% sure the VFD to spindle is a shielded cable it is a orange 3 phase cable dose not look shielded all connections are good tho at both ends

the machine was made in china...

Hi Mactec54

Yes i am using a shielded usb cable with ferrite chokes
i could move the transformer to the right a little bit or i could shield the motion card ?

Thanks
Karl

Hi Gerry

Yes i lowered both acceleration and velocity and still cutting in the wrong place the parts have cut perfect strait lines and arcs and circles i have measured with calipers

the...

Hi Gerry Mactec54

the changes you suggested have not worked not really sure what to do
maybe i will have to get someone who can come on site and have a look

Thank you very much for your time...

Hi Mactec54 Gerry

I reduced the acceleration by 50% and it cut 10 parts before it cut 11th part in wrong place

The Line in the G code said X-413 DRO said X-406 The X Y and Z have been...

Hi Mactec54

Will i need to change the setting in mach configuration ?
Distance Mode is set to Absolute
Arc Center Mode is set to Incremental is this the one i should change ?

Thanks
Karl

Hi Gerry

The feed rate for test shapes is 3600mm per min and for the full parts cut i slowed it down too 1800mm per min

i have added the g code files for both

Thanks

Karl

Hi Gerry

i have checked the manufacturers specs for motors and they are set as per the manufacturers specs

i have done a random shape test cut and it was exactly as should be but when i go to...

Hi

I am having problems with my router cutting parts in the wrong place
I use Vcarve Pro 9 and the mach2/3 Arcs (MM) (*.txt) post processor (Cant find one for mach4)
I am using Mach4 Hobby build...