Hi Craig. Yes, I'm always homing my axis before starting to cut. I press the main home button, which is 0-ing all the axis. But the problem is really in the profile. With another profile, the Soft...
Type: Posts; User: Dimitar_p
Hi Craig. Yes, I'm always homing my axis before starting to cut. I press the main home button, which is 0-ing all the axis. But the problem is really in the profile. With another profile, the Soft...
Hi all! I had some serious issues to make the spindle running on my CNC. After a lot of tries and errors, I found that it was a matter of an XML profile file. So I downloaded an XML provided by the...
Thank you! I don't have a trim pot on the breakout board, but is it possible to add one and connect it to the ACM and VI ports on the VFD? Or it has to connect to the 10V In on the VFD? I'm not sure...
ok, the voltage on 12000RPM is 5.16. I tried to change the Pulley ratio but doesn't look like it's changing the HZ on the VFD. Actually, is it going to change the value on the VFD , or do I have to...
Hi All! So I have the famous VFD HY01D523B. I've adjusted it according to my 1.2 KW 400HZ 24000 RPM spindle. I've also connected the spindle to my WI XHC V control board. The problem I have is that...