My machine is 3kw watercooled, Delta servo motors, 4 zone vacuum bed and mach3 control system
Type: Posts; User: dragon_sa
My machine is 3kw watercooled, Delta servo motors, 4 zone vacuum bed and mach3 control system
The only problem with their site is that they use their main SSL certificate for their encryption, that is registered in their main domain www.bohlercolombia.com, both sites are hosted on the same...
Im not familiar with this unit either, but I do know that usb to serial on win7 is a pain in the ass, if you can get it working at all, just having a quick squiz thru your manual states you should...
Thanks mactec54, I have ordered a 30A EMI filter and finally found someone that will change the bearings and test for high rotor voltage on the spindle, your input and RCaffins is very much...
Its a gdz100-3B 100mm, 3kw, 12A, 400Hz water cooled spindle,
is it possible to get ceramic bearings for this spindle?
I am having a hell of a time tying to find someone that will even look at...
Thanks for the info, tho somewhat over my head, but I will find someone to check it out based on your input, I bought the machine direct from the manufacturer in china and not thru ebay, they gave me...
Thanks for the replies guys, the manufacturer is sending me out the bearings to replace, I also ordered a second spindle from them, so I can reduce the down time on the machine, basically swap it out...
I have no idea, from what I understand its a 4 bearing model with italian bearings, but it screams constantly when its on, just in last couple days, I have been cutting a lot of acrylic but I wouldnt...
Hi, Does anyone know where to get a 3kw water cooled spindle in australia, the bearings are going in mine and its only 6 months old, so need something quickly to replace it while I get it fixed,
...
I struggled with this for a long time, after lots of research I have found my optimum point, using a 1mm upcut blade for plastic, I am cutting at 24000rpm, feedrate of 1500mm/m and a depth of cut @...