My Centurion 5 controller will not boot and I suspect the sbc may be the culprit and would like to buy a replacement or find someone that can repair mine. It was installed on a Standard Modern lathe...
Type: Posts; User: wddanie
My Centurion 5 controller will not boot and I suspect the sbc may be the culprit and would like to buy a replacement or find someone that can repair mine. It was installed on a Standard Modern lathe...
Can anyone recommend a die lubricant for forming a galvanized steel tube? We have a hydraulic swaging machine that slightly swages a tube to grip a bearing, but when we do this with a steel tube with...
For a little more detail, the parts we tap are in the 0.25 to 0.5" thick range with 1/4, 3/8 and 1/2" threaded holes. We also frequently counter sink or counter bore holes in these steel sheets. We...
How do you drill and tap holes in laser cut parts?
We take the flat parts off our Trumpf Trulaser 3030 and use a drill press to drill and tap the pilot holes produced by the laser.
I was...
Can someone tell me what kind of turret is on this old Stand-Modern lathe? I need to buy a boring bar tool holder for it but do not know what type of turret this is and can not pick out a compatible...
I need to select a screw feeding and tightening system to install 3/8-16 x 1.0 in. long hex head flange bolts and wondered if any of you folks had a supplier to recommend?
A few more details, the...
I need suggestions on how to support expanded metal steel sheets in our Trumpf TruLaser 3030. The cut parts or the sheet jump up after cutting and interfere with the laser head. This is expanded...
Can anyone send me the operator or maintenance manuals or electrical schematics for a Deckel Maho DMC 103v with Siemens control, sn 28860008202?
I am a new hire in a plant with one of these mills,...
nash,
I still need manuals for our Deckel Maho DMC 103v and would greatly appreciate if you can help me! My email is wddanielson at hotmail.com .
Thanks,
Doug
Can you send me the files with the manuals and schematics for the Deckel Maho DMC 103v. I am a new hire in a plant with one of these mills, the mill is down and they lost the manuals so I need some...
Is there a horizontal position adjustment screw for the monitor on my yr 2000 VF-3? I see 2 holes in the cover that appear to be over adjustable pots and thought to ask before experimenting to answer...
I did get a response from Parker about 24 hrs after my inquiry and they want 80$ for the entire bowl and do not sell the glass alone (details below). The local Haas dealer never responded to my...
I agree, a new one is 40$ so I will probably just buy one to save time. I emailed Parker mostly out of curiousity and did get a reply that my request was being sent to the proper department. It will...
The air filter/regulator on our VF-3 has a crack in the plastic sight glass and is leaking air. Do you know who might sell the replacement part? I’d prefer to just buy the window if possible to save...
Would this laser IPG 100w DLR-100-AT I see on ebay be a better choice and able to cut the .005" stainless steel foil?
...
I like this approach and plan to use the milling machine approach to build a laser cutter to cut .005 in. thick stainless steel foil. Can you suggest a laser to use? I can only afford about 3k$ for...
I searched ebay for yag lasers and noticed lots of small cheap ones for tatoo removal. The plse rate only goes up to 5hz, so I guess that's too slow, but do you think they might work.
Laser type...
I need to cut .001 to .005 in. thick stainless foil to make parts about 1 in. square and wondered if there was a cheap laser (<3k$) that could do the job. It can run slow since these are prototype...
Can any of you recommend a PM (preventative maintenance) software system? I need to setup something for our medium size shop, and started to do a spreadsheet based system, but we have a lot of stuff...
I did contact Mecsoft via email and got the same info you did. It looks like we both face the same situation, so I probably will not buy the machine software bundle with the VM 5.0. I noticed you can...
I was thinking about buying a used desktop cnc milling machine that comes with a new, unregistered copy of VisualMill Basic 5.0. The current owner says the VM5 has a donngle in the original package. ...
Can anyone recommend a parts supplier for a ~1970 Armstrong-Blum Marvel power hack saw, model # 9/S, sn 98636. I bought this big hunk of iron on ebay cheap and it does run, but it does need a few...
I need to find someone with a laser welder to weld up 3 small and simple battery cases quickly. These are protoypes so I need a quick turn around time. Are any of you interested or can you recommend...
Thanks for the quick and useful response to my questions. It turns out I do not have the transmission, so I wish I had ask you for help sooner so I would not have wasted an hour removing covers...
Thats a nice tip. I would have probably gone with the anti abrasion coating.
Thanks,
Doug
What's the cheapest way to replace the door windows on a yr 2000 VF3?
Someone squirted acetone on our while trying to cleanup and they look vandalized now so I need to replace them.
Should I...
I'm starting up a yr 2000 VF3 that has been out of service for about 4 years and have a few questions. Briefly, I can't figure out how to add transmission oil, what is the overflow bucket and nylon...
Did you use the IPEX and how do you like it? I have to setup a compressor and copper looks way to expensive now and I am just starting the search for alternatives. I'd appreciate your advice.
...
Have any of you written macros for NC Plot that allow it to show the tool path for the canned cycles native to the 1985 era Anilam Crusader II controller? I have one on a knee mil and would like to...
I have not been able to find a Labview VI that sends the step and dir pulses out the parallel port. I hope I can find one rather than having to make my own.
I thought I read in the past about...