Hello
Very interesting design. How do you get enough torque out the spindle motor
to tighten and loosen the nut? Also, it seems that balancing the whole assembly would be a major problem.
...
Type: Posts; User: lvanduyn
Hello
Very interesting design. How do you get enough torque out the spindle motor
to tighten and loosen the nut? Also, it seems that balancing the whole assembly would be a major problem.
...
Hi All..
I have been searching web with little success. I am trying to make a plaque to list the names of our choir directors over the years. We have a vocal and a handbell choir and I am...
I tried to download the DNC for a peek but the web page would not allow me to enter all the required items. I could enter my name and nothing more. Too bad as the program looks interesting.
Larry
Hi all...
Just ran across this thread so I thought I had better post a couple of pics of my project done three or so years back.
Larry
Hu apparently is not familiar with cog belt drive. I am currently building a machine with belt drive on both X and Y axes.
Josh..
So what is the final steps per inch number that you came...
The number of teeth has everything to do with it. The pitch dia of a 16t XL pulley is 1.016 inch times pi gives a travel of 3.484 in per rev. It appears that Josh used the outside dia of the pulley...
Greg..
Do you have any pics of the inside of the alum tele before you put it all together???
Larry..
Benny..
I like it with one comment. It is a bit difficult to read the reverse highlighted line of gcode..
It is pretty simple. Take your table ratio and divide it by the desired number of divisions. Take the result as a fraction and find a plate which has some multiple of the fraction deminator. Your...
Ed
Rhino also has a student/educator discount price of $195 if there is any way you can qualify for that..
Larry..
Mike
If you open it in inches and scale it by 25.4, it will be right on. It is a strat type neck so scale length should be 25.5 in. Distance from nut to where 22nd fret would be is 18.36 in.
...
The file has already been zipped and posted about five messages back..
I would just draw a 24 by 17 rectangle and rotate the part until it laid on the diagonal. The CAM program doesn't care how it is oriented. I would love to have that large of a work envelope. ...
Hey Ed..
A strat type neck is only about 25 inches long plus whatever tabs you are going to add. Why don't you just put the piece on the diagonal of your machine since you have approx 29 inches...
Here is another try at attaching a file..
Larry
Ed
The file attach seemed to be OK but I'm not seeing anything attached.. Is there a size limit on a file?
Larry
Ed
Here is a strat style dxf for your viewing pleasure.
Larry
Hi Ed
Yes, that works only for bolt on necks. My kid has been refinishing a Schecter (sp?) that he owns. It has a hole in the same position so some of the commercial makers put a hole there for...
Greg..
I was reading thru your cutting sequence. Looks like it should work OK. I have done it a bit differently here. I Put a 1/4 in hole thru the body in the neck pocket right on the center...
Hi Greg..
What program and format do you use for your top contour ?
Larry..
Ed..
They may not be cad plans but all it takes is a free file converter to make the DWF files into DXF files and now you can import them into your cad/cam prog and create gcode. There are also...
slpd..
He has an auction right now - 7390210167
Sellers name is - "sunday_luthier" and he lists in the following category - "Musical Instruments > Guitar > Builder, Luthier Kits"
Larry
Hi Greg
Are you still using IGES format for your top profile?
Larry
Hi Steve.
http://www.aidecad.com/
They make several different kinds. The free versions will convert three files and quit. This isn't a problem as you just restart the program and you are...
These are totally CNC. My CAD prog doesn't use DWF files so I used a PDF to DXF converter I found on the web. Once in that format, I tweaked things to my satisfaction and sent the files to the CNC...
First a pic of my first effort at guitar making. It is a pretty close copy of a Strat made with the Belgium plans. This one is made from cherry wood and is solid. It uses a set of EMG active...
Here is a little test to see if I can attach a file.
This is the inside of my Tele knockoff. I used a bolt on neck and a pair of humbuckers rather than the standard dual single pickups.
Hi ED R
I think I paid for the plans sometime in the afternoon here in my office and the plans were in my email when I got home from work.
Hi all..
I have been watching this thread with great interest as I have a slab of mohagany with a Les Paul inside waiting to be liberated. Just finished my second guitar which is a Tele...
Unterhaus...
I had the same problem with my series I. The Z axis motor and pulley were missing. I bought a 10 inch piece of 13 tooth stock and made my own pulley with the taper lock hub like the...