Search:

Just found out, parts can be made out of 4140 pre-hard on the rails, and regular 4140 annealed on the carrier, so heat treating is not required.

We are Located south of Richmond VA. but will provide freight for parts if sourced to a non-local shop. Regards, Herman

Looking for a shop that can handle this project. Tool steel, aprox. 3/4" thick x 4" wide by 16ft long. 6-parts, requiring precision milling, drilling, and heat treating. Interested parties contact me...

Fisrt time since new, 1988 RoboDrill with Fanuc OM control blew the little 5amp-24v fuse on the power supply. Did'nt think nothing about, changed it, fired right back up, and back to work. Then, this...

Just an FYI, I have a complete Fanuc 5M contol from an old Matsurra VMC that we scrapped years ago. Was saving it for parts while we still had 5's running on other Lathes & mills, but never needed...

OK, maybe this is where my problem is. On this old Pratt & Whitney VMC, I have been using G92 for setting machine coordinates in the program. If I go to the offset page, (Hard button on the right...

Ok, maybe this is where I'm confused. My machine sets up work piece coordinates with G92 in beginning of my programs. (distance from machine zero to part) Which then becomes my part zero. My program...

Thanks for the replies guys, but I'm still a little confused.. Maybe the G55.G56 is what I'm after. I just want to duplicate the one part in a seperate vice. Y axis would still start at the same...

I have never used the g52 function, and I really need to speed up production on my mill (fanuc OM control). Would like to use 2-vices without writing the program twice and adding in my 10" between...

Parting out a 1980 mdl Hardinge AHC (automatic chucker) email me if your looking for parts. [email protected]

If anyone needs parts, I got a complete 5M free standing control w/drives. Came off a Roku/Roku VMC. $500 come & pick it up. 910-399-5954

new problem today... spindle still has not come back on... now for some reason its acting up zeroing in on z-axis, checked the microswitch, and its fuctioning fine. Sometimes it will zero right in,...

Okay, I moved my "running" old Pratt/Whitney cnc lathe down south, and I guess it misses CT!! Ran fine before dissconnect. Put it in place in its new home, powers up, but the spindle will not...

Thanks for the post Paul, but unfortunetly I'm still not running! Yes, I did realize the tape reader is supposed to run. My stupitity. My machine does not have a transmission/gearbox so there is no...

Glad to here you got it fiqured out! Does'nt look like much help in this Forum. I started a thread about a month ago, as I'm having trouble with a 5T. Can't get the spindle to start. Those Matsurra's...

Are you sure your phase rotation is correct?? All in coming voltage at where its supposed to be?? 200 or 230?? Fiqure we would start at the botom.:)

For what its worth, I have a surplus entire 5M control if anyone needs parts. Unfortunetly I'm still running 5T's and this is where my problems lie! I kept this control for parts, but there is not...

don't know if your still looking, I know of a real good deal on a small, "real" cnc machining center. Its a Roku-Roku Vertimac-0 I think its like 18x16x12 10-tool atc, and Fanuc 6MB control. I've...

okay, I found out the tape reader is not giving the problem. So scratch that question. Still can't get the spindle to run, and still have the #70 alarm when I try to input any code :confused: Says...

Hi, all! Another Newbie here in distress!! Tried scanning some older 5T problem posts, looking for answers so I don't bother you guys for nothing, but no luck. So here goes. I bought an old P&W...