So I think I finally have my SuperPID fully functioning with Mach3. I had no problem getting the spindle to turn on and off using Mach3 via Output #1 hooked up to Pin 17. However, when attempting to...
Type: Posts; User: mkbryant
So I think I finally have my SuperPID fully functioning with Mach3. I had no problem getting the spindle to turn on and off using Mach3 via Output #1 hooked up to Pin 17. However, when attempting to...
When I first read through this thread, I came across post #1853 (http://www.cnczone.com/forums/spindles-vfd/112658-cnc-manufacturing-forum-post1141046.html#post1141046) where user j.steensen had...
Solidworks doesn't let you save down to an earlier version, so unless you upgrade your solidworks, it will be impossible for you to open these files as-is. However, someone could save this assembly...
From the SuperPID manual:
crashswiftly, How timely that you would be troubleshooting your setup with the SuperPID and MX4660 the same weekend I am starting to work on my SPID and MX3660 setup. I plan on having practically the...
From the manual:
282270
Maybe I misunderstood your question. Are you asking about leaving the SuperPID in one speed control mode and simply switching from manual to computer, or wanting to...
It's all about the speed control curve used. Page 21 of the SuperPID manual shows the two modes--one for manual control that uses a semi-log curve, whereby the amount of rotation of the knob is...
This whole process has been very slow due to my inexperience with CNC, essentially changing jobs back in December (I was on an international rotational assignment with 4 weeks on/4 weeks off, coming...
Thanks for that, Gerry. I guess I didn't realize that the MX3660 digital output could be a PWM signal, but then when you think about it, that's exactly what a digital signal is. At first I thought I...
Wanted to show off some of the first things I've done on this machine that actually look like something. Other things I've cut were pieces for my electronics enclosure and they are kind of boring to...
I really like the look, features and price of the MPG2 from CNC4PC. Looks like that one requires a C22 BOB, which apparently doesn't have additional breakout functionality. I'd need a separate BOB...
Just wanted to post a few renders of my electronics enclosure. I don't have Solidworks files of all the components and bulkhead connectors, but I feel I have enough of the bulk for a decent layout....
Gerry, thanks for the info. Would something like the C13 from cnc4pc work (C13 - Basic Breakout Board)?
Is it simply not possible using the MX3660, or would it be more trouble than it's worth?...
I've finally placed my order for a SuperPID to use with my Bosch 16171 (single-speed, 25k rpm) 2hp router.
I've seen a number of different configurations in this thread and others connecting the...
Haven't solved the dust problem yet. I made a deal with my wife to make a few props for a play she's directing, so that has been my priority. Couple that with being busy at work, having a...
Just a quick update...
I discovered that my table was out of level some 0.030" or more from one end of the X-axis to the other. I found this out the hard way during cutting out a piece and trying...
Got the machine up and running and have started cutting some pieces. I've designed an enclosure for the electronics and have started making the pieces out of some home depot "white wood". It's really...
Thanks, I was thinking about having a custom sheet metal enclosure fabricated, but in the meantime I might go with acrylic or plywood just to have something more substantial than a cardboard box.
It's been a busy few days! Finally got in the full black anodized 80/20 extrusion and brackets and began final assembly. I bought a Kennametal M8x1.25 aluminum tap from MSCdirect (which btw, ships...
I've continued construction and began wiring and testing the electronics. I plan to have a custom metal enclosure fabricated once I get everything wired up, but I also want to add another power entry...
Boxes from CNC Router Parts arrived and the unpacking commenced.
265216 265218 265220
265222 265224 265226
I have ordered all the 80/20 extrusion direct from a vendor here in Houston....
Thanks for the info. Looks like a great plan, please do post photos when you finish.
It looks like the bearing sleeve is item number 32 on the parts diagram (Bosch 16171 Parts List and Diagram -...
Finally have a chance to sit down and give a quick update. I have been otherwise occupied due to the birth of my daughter. :eek: :D
Shortly before that, I went ahead and pulled the trigger on the...
trmpyro, please post the picture you are referring to and any details related to installing the speed sensor on this router. I am very curious. A swagelok fitting or some through-bulkhead fitting...
Thanks for the info, Gerry. Have you run the SuperPID at low RPMs cutting hardwoods, hard plastics or aluminum for any length of time? How did it perform temperature-wise? What size/power router are...
Wizard, thanks for the explanation. Makes things a little clearer. There seem to be so many things in the magical world of electricity that don't make sense to me. Give me a bolt, gear, spring or...
Whelp, second purchase made--precision collet set for the Bosch 1617 from PreciseBits.com. Currently waiting on Ahren from CNCRouterParts to get back with a final invoice and then the waiting game...
Excellent, I would be very interested in the photos and plans of your dust collection fixture. Sounds very similar to this one (KentCNC, LLC. Standard Dust Shoe) but at $159, I am definitely...
Alright, so due to the fact that I am, admittedly, not an electrical engineer, I was a bit confused about how these hand-held routers actually control and vary the speed. But I am a Mechanical...
Thanks for your comments fortyeight! Those edge-lit signs look nice. Are you just using an LED strip underneath the acrylic?
What electronics package did you purchase for your BenchTopPRO? The DIY...