The shaft taking a hit was a concern so I used plenty of heavy shipping packaging around the motor and a cardboard shipping tube cut longer than the shaft to protect the shaft from impact. The...
Type: Posts; User: SShep71
The shaft taking a hit was a concern so I used plenty of heavy shipping packaging around the motor and a cardboard shipping tube cut longer than the shaft to protect the shaft from impact. The...
He sent me a picture with a pair of vice grips on the shaft, he is claiming that it will not spin with vise grips on it. The motor was sent in a large USPS box with a large tube over the shaft to...
From what I understand SEM DC servo motors are robust and built very well. I tested a motor with DC power (in the appropriate voltage range), then shipped the motor with the shaft protected from...
I haven't done much with it yet, but I did test sensors. Everything seems to be ok at this point. I am thinking it is the LCD control panel. The machine was wired for 480 3 phase, but I only have 230...
Does anyone have any input on Coaire scroll compressors? I have one that currently doesn't work and I am trying to figure out if it is worth trying to get it up and running. Everything spins, and...
Yes, sorry. I am in Temecula, Ca. I will edit the posting.
This is the list of bar stock I have for sale, I am willing to ship any quantity. I can/will cut (most of it) for a fee. Fastenal is a good shipping point, but I can palletize. If it has paperwork,...
https://www.cnczone.com/vb/images/icons/icon1.png Anilam Crusader II control, whole system
I scrapped the Webb mill that had the Anilam controller on it. I kept all the electronics in case...
I am still somewhat new to my 3016 94' Fadal VMC, I have a question about subroutine. First off, I do have access to CAM software, I just want to ensure that I know all the manual stuff before I...
https://www.cnczone.com/forums/attachment.php?attachmentid=404012&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid=404014&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid...
I was given a tsudakoma rncm-251r rotary table not to long ago and am finally getting around to bothering with it. The drive motor is missing, as is the accompanying gear. I currently have a VH65 on...
The previous owners of my 3016 removed their USB adapter prior to my purchasing it, it appears as though someone just simply pulled the wire of the DB25(RS232) cable from the unit instead of pulling...
I just finally was allowed to buy a VMC, I would up with a Fadal 3016 88HS from 1994. I have experience with HAAS programming, and before I start to look at CAM software I want to make sure I get the...
PING* bringing this up again as I am at this machine to try to figure this out once and for all. If anyone can help it would be a huge help, and maybe I can send some beer money over for the time.
Yes, I still have not gotten the machine up. It has sat for all this time and I have gotten no where. I finally have the manuals for the machine and they are somewhat helpful.
I was hoping there would be someone here that could give some insight on the Mustang C-42 VMC with a Siemens 2100 control.
I am still searching for a smaller VMC and I found a Rebel 1 that needs some work. I just wanted to know what the consensus was about this machine. It is from 1999, and due to a oil problem will most...
I am working on an Ecoca PC1840, with a ITRI MIRL controller on it. The machine sat at the University of Central Florida for years without being touched, now I have it. I got the controller to come...
I tried the manual, and the techs at Mitsubishi, but I cannot figure out what is causing this error to display/cycle. The machine comes up in an "edit not-ready" state after the E-stop is cycled....