Search:

Pont463, shoot me a PM with your email I have a arix CNC 90 and Tim sent me some info.

If anyone has the schematics could they flick me a copy to please. My Arix CNC 90 is having "issues" [email protected]

Cheers

If your after real good I use iscar solid carbide they do alot better then other big companies stuff. If your after cheap but good, try CTC tooling. They have a web site and an ebay site. They also...

Hi all.

Anyone recommend supplier for Fanuc cards here in OZ? Spindle drive coming up with an error local fanuc bloke going to organise a card to see if tha'ts it before replacing the whole...

Hey Roger, You have a win?

Mick

ThyssenKrupp Aerospace - ThyssenKrupp Aerospace

We're all getting screwed in AUS but here in WA its worse we're getting spit roasted. They mine the bauxite here yet our prices are the worst in the...

No worries Roger keep us posted on how you go.

They also do a free material handbook off their website, shows what they carry and which aircraft manufacturers use what grades and a few other bits...

Have you tried ThyssenKrupp aerospace?

Never had a drama machining the 6061, the furniture extruded stuff is very sticky. Capral over here have stopped cutting ally plate (like we want to buy a...

Thanks Eric,

Gave me confidence, bought one its a MP1S, on the side where the inductive unit is their is a 5 pin din plug. I removed the 2 cap screws and the inductive part just unplugged. I...

Thanks Air gunner, couldn't find anything on the yahoo groups but thats probably just operator error, did find this though is that what you were thinking
...

Hi All,

I was chasing a secondhand probe and a company I used to work for has a couple but their inductive and the sensors are U/S. One is optical so the question is for both really.
Has any one...

Does sound like calibration, been a while since I played with one but have you checked the normal stuff like g53 or g54, tool length and number, metric or imperial co ords? Can't remember much of the...