have the cncest 6040 1.5kw spindle with the bsmceo4u-pp usb controller board.
BACKGROUND - YOU CAN SKIP THIS PART:
I've cut a boot for dust collection, did some cup holders with engraving, did...
Type: Posts; User: mistermikev
have the cncest 6040 1.5kw spindle with the bsmceo4u-pp usb controller board.
BACKGROUND - YOU CAN SKIP THIS PART:
I've cut a boot for dust collection, did some cup holders with engraving, did...
one more tidbit... the way I'm finding zero on my work piece is to follow a long centerline jogging the machine from one end to the other on the y axis to ensure the workpiece is centered. does not...
thank you for your response sir.
generating tool paths in aspire using the mach3 output driver. Initially since this cavity has a 1 deg incline as well, I was using a rough and finish path...
thank you again. I'm sure there is a setting, just new to it so will have to consult the manual.
afa heavy cut... I changed my cut depth from .125 to .08 and still the sm issue but further......
thank you very much for the response. so... acceleration is in mach3 settings correct? I will check that next. I cut my pickup cavity (which is a box) after my initial botched attempt at the neck...
so, I bought my cnc knowing I'd end up here at the school of hard learning... fully admit it was a terrible idea to be a newbie and get this machine.
at this point... I've done 6 or 7 little...