Here is my two cents for what its worth. My Sieg X2 conversion using the Xylotex complete system and the CNC fusion kit.
It worked for 3 plus years until I blew up the Xylotex board just a month...
Type: Posts; User: Woodenspoke
Here is my two cents for what its worth. My Sieg X2 conversion using the Xylotex complete system and the CNC fusion kit.
It worked for 3 plus years until I blew up the Xylotex board just a month...
I have owned the Fusion kit for my X2 for over 4 years and love it. Just ripped apart the x and y axis to clean it all up and readjust everything.
No its not perfect but either is my X2. Its has...
I checked all my motors and I am getting 1.2 Ohms from each pin set on each bipolar motor so I guess they are still good to go. I will most likely move up to a more powerful stepper motor anyway and...
Over the past few weeks I have been messing with My Sieg X2 mill upgrading the stand and adding a flood coolant system. The other project was to make a bigger fixture plate so I can hold pieces...
Maybe a little late but I just had the same thing happen. At first I assumed it was the PSU but after disconnecting the board from the PSU, the power supply was running the proper voltage.
...
seems like you are getting close.
When I first opend my x2 years ago it had a dip in the middle .02. Noticable but I was going to use a jig plate anyway which spanned the gap. It was this way for...
I have some simple 2D items I would like to convert from a vector or raster image directly to Mach3 capable gcode.
That is without having to redraw the shape in a higher end program save it as...
No need to pay for that info as it is freely available on the web
http://personal.atl.bellsouth.net/t/h/thib9564/Atlas_Lathe_FAQ.htm
Hope this helps
No one else has any suggestions????
The glue idea is out as I have to do 25 pieces at a time. I do have a sacrificial plate above my jig plate as I have been cutting out holes in similar sized aluminum plate. I will have to see if I...
I am in the process of setting up for a small CNC project where I need to cut two pieces out of 1/2" and 1/4" aluminum. My CNC machine is small a Sig X2 type.
The first piece is an oval plate...
Was in NJ when I bought the X2 we are both in Colorado now. From what I remember it's a crap shoot regarding the table. Some people got perfectly flat tables some didnt. I only found out once I...
Sure if I really wanted to take it to a shop. I guess I could also put it on the new mill and face mill it if I was so inclined. Since it is for producton runs of snall parts the 1/2' thick Jig plate...
Its over. Purchased the new mill.
I decided on a RF-45 clone as suggested here, since if i need to lift the head I don't want to loose my position. I want this to be a precision drill as well as...
I have been to so many sites that I forgot about this one. I shot an email to the sales dept since I do not see a stand whichis a freight only item. I was wondering about that smaller mill which...
After some soul searching and hours of pricing out things, I think I will have to reduce my needs to only a few items.
One I want to stick with a machine which can run off 110V as I have half a...
Thats an interesting mill. But it is kind of expensive. I want a bigger table but I can pass on that size since I will not be needing that much work area. Doesn't look like it has power down so no...
I think I would regret not buying a bigger mill. I have looked at the X3 and variants of it.
I guess I should ask a few more questions. Probably this one has been answered 1,000 times.
Square...
I may be wrong but you need two phase AC to use 220v motors. I have seen homes with only one phase coming into the house. I modified my post so others will not be confused.
I do know what I...
The Jet mills are sold with free freight (check amazon) and a power feed model is $2300, except it does not pivot and I believe it was 3 phase. I guess I could look for a 90 Deg adapter instead. I...
A while back I converted a Harbor Freight X2 into a CNC mill. Works great but it is setup for certain production tasks with jigs and as a general shop mill it's not worth breaking down the setup each...
AC
You have a knack for putting people down. It was a simple question I asked the winding coding process.
Not everyone is as great as you and we have to ask questions before we understand. This...
This is a new one on me Excel generating G Code, maybe you can enlighten me on this process?
I hope this what I am looking for, looks like the plugin mentioned by GER21
http://www.machsupport.com/forum/index.php/topic,50.40.html
Picture of the pluggin which I have not tested, it's the...
ampclutz Its a simple answer all of the above. Why build a machine that is limited to one design. I was asking this information so it can be posted on the Music Electronics Forum you and I are both...
We are back to basic G code programing. I am not only asking this question for myself because if I was so smart I would have just gotten a book on G code and tried to learn something new.
I...
Pickups, This is the Instrument and design section, Hummmm!!!!!!
For all of you who do not know how a guitar or bass or any instrument pickup is made you wrap a very thin coated wire around a...
First I don't have the winder this was a pre winder build question. Yes the programming is simple which is why it is so hard to do. People create programs to do complicated things. This is not...
I am not here to figure out how to build a CNC winder but find out about the programing. The winder will be build using two steppers
1. This stepper moves a set number of 360 Deg turns CW or CCW...
there is a pci card that works with the xylotex board but off the top of my head I cant remember the brand, worked fine with my dell insperion 6000.
I am trying to get a friend to ship me back...