Search:

Home

Well I changed the power supply and solved the problem. Thanks for your help everyone.

Tri-Mag in Cali made the power supply and was very helpful. They were FADAL's supplier for these units and...

Hi Everyone,

I have a VMC 15XT that has been giving me the start jitters.

Flip the disconnect, hit the green power up button...sometimes everything is good and sometimes not. When it doesn't...

It was the clock card.

I checked the feed rate pot it was ok. The keyboard interface card and finally replaced the clock card with immediate success...dialed everything in and I'm back in...

Anybody have any ideas???

I'm still puzzled...

What about the clocks board? I was testing the feed rate knob calibration per the maintenance manaul method.

When I'm in MDI mode with M49 (Feed Rate Pot Disabled) test...it traverses the same...

It doesn't matter what program. I got the machine 4-1/2 years ago and when I turned the feed down to zero it always kept feeding and when I ran it up to 150% it wasn't quite there either.

The...

it happens randomly...I could be in the middle of a drill plunge and my feed rate will go from 14 ipm to 0 ipm and the machine will say "Feed-Rate Stop" and the blue cycle stop light will flash.
...

Please help guys...

The axis feed rate drops to zero then back to normal. This happens on all axis's. Just started doing it.


Thanks in advance for your help

Thanks a bunch AndyB

Machine is up and running.

I'm doing my spindle change as we speak. I had to buy the bearings from Motion Industries.

Bearing part#

BARDEN BEARINGS
210 HCDUL $380.00
112 HCDUL $461.00

The job so far has not...

Contact Mach, Inc.

They specialize in grinding wheels, they've been around since 1968. They also alter grinding wheels for all the major companies out there.

www.mach-incorporated.com

Thanks a bunch Dango

I'm going to nurse it for awhile and watch it carefully. Fadal CNC told me about $900 in parts to rebuild the spindle. They were great and very helpful, I would recommend...

If you could that would be great.

Thanks

I need help ASAP on my 4020 Fadal. The spindle bearings have started to make noise since we had a crash. I need to know if someone has taken apart their spindle and rebearinged it. I can't believe...

Thanks so much :cheers:

Hey can anyone help me find the website to a company that has a waterjet attachment/conversion that will fit a VMC. I was reading an article in one of the machining magazines about the company who...

After reading this I'm glad Mishikwest got a resolution. When I bought my Fadal Reman 4020 last year, it broke after owning it 4 weeks. I was told by Fadal and the sales guy that Fadal replaces...

I would like to know also the best procedure for doing this. I've read the manuals and some parts of the adjustment procedure are not to clear. My area of concern since I have a 4020, is the center...