I started one for those of us who have the machines to support each other
Type: Posts; User: evilusions
I started one for those of us who have the machines to support each other
You fixed my problem after replacing my mx4660! Thank you\
When my light was flashing the driver board for that axis was blown. I had to buy a new mx4660, which I’m still trying to get to work.
Same boat here. I’ve been trying to gather all the same
I bought the full one. Everything I have calculated and tested has seemed fine.
Does anyone have a source for replacement parts for the Gryphon machines?
I’m trying to decide if I’m happy with mine. I have beat the crap out of it for about 3 months running about 12 hours a day. I now need to replace all the rollers, all the stepper gears, and the z...
That's great because the igus cable carrier rep was due in anyways to quote me the carriers on this machine.
Thanks,
Looks like i have a short between pin 1 and 3, but only when the cable is plugged into the spindle. Does that mean a bad spindle?
Looks like i got your settings from another thread. These are what i used.
https://uploads.tapatalk-cdn.com/20180228/575e3f552ac91005ff1b5952d24fe827.jpg
...
I purchased a Gryphon CNC 4' x 8' kit about 9 months ago. I received it about 2 months ago, and finally have it all built, wired, and trying to run parts.
I have Mach3 running to a UC100, to a...
I just put this settings into my Huanyang VFD hooked up to a 2.2kw spindle, and I am still having some troubles. I get an EOCA alarm anytime it tries to ramp up past 80hz. I have a good supply of...
I just fixed this problem on my SL-300 by following the attached instructions from the manual.
240938
I just got this error fixed on my Johnford SL-300 after crashing the turret. I followed these instructions from my manual, and it worked.
240936