Title: CNC Lathe Operator
Shift: Second (4 p.m. - 2:30 a.m. Monday-Thursday)
Descripton: Sets up and operates three axis CNC lathes. Qualified applicants must have a minimum of one year CNC...
Type: Posts; User: cinci5
Title: CNC Lathe Operator
Shift: Second (4 p.m. - 2:30 a.m. Monday-Thursday)
Descripton: Sets up and operates three axis CNC lathes. Qualified applicants must have a minimum of one year CNC...
Is there a good teaching book for feature cam that someone can recommend just got a seat at work and no one can run and no support from featurecam with out $$$$$
great thanks for all the help.
really, ok thought it was like the registry of windows it would read the backlash on bootup
ok thanks thats like the Haas I used to run :)
Is that lock/unlock funtion meaning (1) to unlock, (0) to lock again. I know you have to shut machine off to read change but want to lock it back out after making change. :o
trying to set x axis backlash parameter but machine says locked out key is ok can't remember what to push to modify parameter :confused:
I did what you said but it would not open using (file - open) it said not reconized and there is no input NC file that I can find I have X3. :confused:
I deleted a .MCX but still have . NC program, can I run .NC program inside of mastercam to regenerate toolpaths and then modify or do I have to redraw everything
Thanks mike you solved 2 problems :D
is here a way to convert a drawing in X3 from metric to inches I drew in metric but now need inches
Might get a job with a company that has these controls. I know how to run Fanuc, Haas, Okuma, Cincinatti 850SX, Mori all lathes. Anything special about these . Moderator did not know where to post so...
call me soon i need your number to write down
ours took a dump and need a new one (used also) any body know where to get a cheap one or can help with one from you guys
what is the L.01 ?
what is the K0.0004 ?
trying to get it understood for Okuma
help with example !
3" stock, 1" drill hole, 1/4 b bar
I want to bore to 2.75 X .5 deep in .03 depth of cuts canned cycle
this is just for ...
Broby is right I was led wrong from a guy who I am suppose to replace has Ego problem
here is some info on PDF
send tool home first G00 X22 Z22
T01 tool number, 2nd 01 X offset, 3rd 01 Z offset
cant use G54
use G95 not G99
try this
G0 X22 Z22
G0 T010101
G50 S1000
G97 S400 M3
If you are who I think you are call me Jeff
In other words
G02 X2.25 Z-.02 R.02
WHICH WOULD IT BE
G76 G02 X2.25 Z-.02 L.02
G76 G02 X2.25 Z-.02 L-.02 :confused:
Any help?
I have modified a Fanuc lathe post to Okuma lathe, have not actually ran part yet but can I use "L" in place of a "R" for radius and have it funtion right ?? That is the only problem "I" & "K" work...
Thats the exact problem "write protect" I thought that G54 was read as default or Modal and not needed to be called up, I have been putting (using) G56 in programs but new to this particular machine...
When trying to set G54 with measure (Z) Zero by pushing measure then z zero enter. I get a locked error of some type, almost like I have to push something else also, G55, G56, etc. will work but not...
its a E- series 2003 http://flashflomfg.com/images/large/turning-outside.jpg
This is the exact machine I run. I have tried to look at the manuals but there must be 20 differant books in no...
what are the 1,2,3,4 tool nose quadrants for the IGF controls for instance #1 quadrant is it for Boring (not in front of control till Monday so be gental). Just started a new job and used to Haas,...
It comes out the end, we had the same problem after installed Haas offered to remake sheet metal and install it for it to come out front but never got installed. Now the plant is closing ( American...
Hey PBMW you say it is a piece of cake but with out a post how do you do it with what software. I use deskengrave for end engraving but would love to do outside OD engraving any suggestions ?
We run H13 all the time but I didn't think you could get up to 72Rc on H13. We use alot of Ceramic and WG 300 wisker grade greenleaf on our hard stuff
I run the machine Tech Ted is talking about and the probe came from Haas it has a long arm Renishaw probe. Definitely check turret tooling clearance as that is a big issue with live tooling. When...