529,882 active members*
2,407 visitors online*
Register for free
Login Register
Geiger Maschinen-Vertrieb

Contact

Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
James-Watt-Str. 12
72755 Metzingen
Germany
+49 (0)7123/18040
+49 (0)7123/18384

Route planner

Route planner

KEHREN RS 15 CNC

Asking price


  • Reference number 1049-716151
    Manufacture Year 1992
    Operation Hours not applicable
  • Metal working machine
  • Grinders
  • Rotary table surface grinders with vertical spindle
  • SIEMENS Sinumerik 3 G
  • rotary table diameter
    1500 mm
    grinding height
    500 mm
    grinding head - power requirement
    110 kW
    Control
    SIEMENS Sinumerik 3 G
    total power requirement
    140 kW
    weight of the machine ca.
    17000 kg
    dimensions of the machine ca.
    m
  • K E H R E N (Germany)
    CNC Controlled Vertical Rotary Table Surface Grinder
    Model RS 15 – CNC Year 1992 Serial No. 4274
    __________________________________________________________________

    Built-on Magnetic rotary table Ø 1.500 mm (!)

    Working height under grinding wheel, max. 500 mm
    Segmental Grinding Head Ø 900 mm
    Grinding Head adjustment vertical 500 mm
    Grinding spindle speed 750 rpm
    Grinding spindle drive 110 kW !

    Table Travel, horizontal stroke 900 mm
    Table speed by hydraulic motor, infinitely variable 5 - 22 rpm
    Max. load on table 2.000/5.000 kg

    Vertical infeed of grinding head, infinitely variable 0.05 – 0.5 mm/min
    Vertical quick feed approx. 280 mm/min

    Total electrical load, approx. 140 kW - 380 V - 50 Hz
    Weight, approx. 17.000 kg

    Accessories / Special Features
    * SIEMENS CNC Control, Model SINUMERIK 3 G for infeed of grinding head (Z),
    table adjustment (X), dressing amount and speed (W, V) with all the
    necessary cycles and programming possibilities. Manual Control unit for
    correction of cutting parameters
    * CNC controlled automatic grinding process with input of feed amounts for
    pre-grinding, fine grinding,finish grinding, spark-out and lift-off from
    workpiece.
    * CNC controlled swivelling grinding wheel dressing device, built on below
    the segmental head with automatic compensation. Dressing can be done
    during the grinding process, i.e. the grinding head and rotary table stay
    in place.
    * Automatic Swivelling of grinding head from cross grinding to radial
    grinding,
    * Radial grinding = higher material removal. Cross grinding = more accurate
    and flatness
    * Rotary magnetic chuck with ring pole division and stepless adjustment of
    magnetic power.
    * Adjustable gap control (to avoid air grinding),
    * Separate switch and control cabinet with Amperemeter for Grinding Power
    * Large Coolant device with 2 Magnetic Separators and large intermediate
    tank for approx.
    * 3000 Ltrs. Coolant Liquid, Coolant Supply thru grinding spindle center,
    Oil mist exhaust,

    Condition : Good to very good. Machine can not be demonstrated under power
    because of high Power rate.
    Delivery : Ex stock, as inspected.
    Payment : Net, after conclusion of contract.




    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from Hans-Jürgen Geiger Maschinen-Vertrieb GmbH