The horizontal CNC flange and end machining machine FEB 3-150 was designed to mill, drill, deburr or thread the ends of round or profiled workpieces of any length quickly and easily. The powerful NC spindle motor in combination with the Siemens CNC control, type 840 Dsl, guarantees a stepless spindle speed range of up to 6,000 revolutions per minute. The massively dimensioned feed axes (X,Y,Z) allow a maximum stroke of 150 mm each. The clamping table in front of the machine is equipped with two manual centering clamping devices type V2 from the Hagen & Goebel product range „Busch“. The clamping range is currently 12-100mm for round material. Instead of the clamping bars, customer- or factory-specific devices can of course also be set up. In contrast to the usual horizontal machining centers, the workpieces can be changed quickly and easily thanks to the open design of the machine. Thanks to the optimized design for the machining task, the machine is very compact. Due to the open design, larger workpieces play a minor role. Through the use of CNC control and integrated standard cycles, both hole patterns and contours on workpiece ends, among others, can be produced in an uncomplicated manner. The machine specification can be specially adapted to the customer's requirements. Among other things, automatic tool changers, internal coolant supply, adapted speed and stroke ranges of the machining unit and much more can be realized. This machine and its possible options have been developed by consistent implementation of many years of experience through the construction of CNC - controlled machining centers. Translated with DeepL