Search:

I've been looking for this information about cutting and desoldering the tracks. I started to experiment with Mach3. So far I can enable the controller to energize the two motors and I can activate...

Has anyone been using the parallel cable conversion using the original controller, I believe controller 0200. It only has two axis, x and z according to the manual?

It you can share your XML file...

Been exploring the move command in the help files and see that the point selection when used in conjunction with direct auto as the link, the rapid moves move down to a z amount desired.

Is there...

Aldepoalo, I'm trying to follow the video as well as the helical gear you made using the wrapping group method. I know this is an old thread.

Now that V29+ have wrapped geometry as an option,...

Thanks for the help. It solved my issue. I did not realize that I needed to put a positive value there. I did put a -.375 once there but didn't occur to put a positive. I did put a negative .375...

I'm in a tough situation. I have managed to work a 4th axis toolpath and works great in the simulator, but when I try to post the Z values fluctuate greatly to the point that it is ~.6" off the...

Has the release 1182 being updated? I've been getting incorrect feedrates for the flatlands. It plunges at the cutting feedrate rather than the plunge feedrate no matter which lead in I use. You...

Do you know how to get rid of the invalid corner radius error? I have assigned the tool and have called it but get an error on compute. It might just be the solid as I'm trying to cut just half of...

Hi Gurus,

I made the switch from another cam software and was wondering whether I can copy toolpaths. I'm doing a lot of experimenting and I hate to say that I hate to select the darn surfaces...

I'll check on that but it does not sound familiar in ez-cam.

I came across the velocity setting in mach3 and lowered the velocity to 400 from 600. I was skeptical whether this changed the amount of rotation but a quick test in air does not change the amount...

What do you have in mind for making a 3d on your taig?

I use a taig to make small molds. Everything I do is in 3D except for the squaring and flatting the stock.

I will pm and send you...

Okay gurus,

I need to run my A-axis at a much slower rotation speed. My ez-cam is spitting out an F460.824 speed for A-axis while I'm running xy @3 ipm and z at @.1 imp. As it seems I cannot...