[johnyj]

Hi,

Trying out latest Postprocessor for my Siemens 810d controller and I get an error message. Can anyone give advise on what needs to be changed in the post to allow it to run on my Siemens 810d?

I named the file to run the test NEW_POST

Any help will be greatly appreciated.

See jpeg for error message

[johnyj]

This is the Jpeg

[veselin704]

It must be so.
;%_NEW_POST_MPF

[cnc_operator123]

I wanted to use 2018 powermill on my deckel maho siemens 810d panel bench, but the posts inside did not fit, you have every panel, but there is no 810d so I could not run it.
if anyone can solve this contact me

[email protected]

[cnc_operator123]

By the way, I'm using zwed cad, I have a post written in china, you run the machine, you have the n codes, look this post

;Programmed by Lenovo
;
;Tool 0 is 8 KURE.
;SHAPE PARAMETERS

G90 G00 G17 G40
;Operation - 8KURE
;Tactic - 8KURE
;Plan -
;File - SARE YEMEK KAŞIK YEKPARE ÜST.Z3
G641 SOFT
G90 G00 X-15.2384 Y2.6032 S6500 M03

Z25.
Z-15.5198
G01 Z-17.5198 F3000.0
Y2.0015 Z-17.4702
Y1.3997 Z-17.4325
Y.798 Z-17.4081
Y.1963 Z-17.3976
Y-.4054 Z-17.3998
Y-1.0071 Z-17.415
Y-1.6088 Z-17.4439