[Alex44]

Hello
I have a Lilian Millpwr with Acu-rite controller 1995, had an issue 3 years ago with the boards and couldn't find someone to fix it only one guy to bypass the cnc and get it working as manual. Now I found one guy who had it working 95% but with only one problem he thinks. There's 4 wires coming from the X and Y boards to the eletric box on side, 2 black, 1 brown and 1 blue, the black and the blue are disconnected and he doesn't know where to connect them and at the screen shows the servos are off. I really appreciate it if someone could give me a help with this issue!

[machinehop5]

...some photos of Motors, Boards and Terminal hookups on the boards would help.