529,807 active members*
3,416 visitors online*
Register for free
Login Register
HESSE + CO Maschinenfabrik

Contact

HESSE + CO Maschinenfabrik GesmbH
Industriezentrum NÖ-Süd, Straße 4 Objekt 8
2351 Wiener Neudorf
Austria
+43/2236/638 70-0
+43/2236/636 62

Route planner

Route planner

ZMM C 10 TMS

Asking price


  • Reference number 1069-2357
    Manufacture Year not applicable
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • Centre lathes
  • ZMM
  • 380 mm
    760 mm
    520 mm
    950 mm
    560 mm
    3.000 mm
    . 11 Nr
    132 mm
    140 M
    15 kW
    410 mm
    150 mm
    105 mm
    6 MK
    225 mm
    4.470 kg
  • driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm € 48.810,- turning length 2.000 mm € 50.990,- turning length 4.000 mm € 65.430,- turning length 5.000 mm € 74.460,- turning length 6.000 mm € 84.340,- centre height: 380 mm swing over bed: 760 mm swing over cross slide: 520 mm swing in gap: 950 mm width of bed: 560 mm distance between centers: 3.000 mm spindle nose / DIN55027: No. 11 spindlebore: 132 mm spindle taper: M 140 Drehzahlen (variabel mit 3 Stufen): 7 - 42; 28 - 170; 165 - 1.015 rpm main motor power: 15 kW number of feeds: 150 longitudinal feed range: 0,039 - 18 mm/r cross feed range: 0,02 - 9 mm/r number of threads: metric thread range (76): 0,5 - 180 mm inch thread rangel (76): 60 - 1/6 Tpi module thread range (76): 0,125 - 45 DP thread range (76): 240 - 2/3 cross slide travel: 410 mm top slide travel: 150 mm tailstock quill diameter: 105 mm tailstock quill taper: MK 6 tailstock travel: 225 mm weight approx.: 4.470 kg

    This ad was created with MODUL MWS - the software solution of LogoTech.

Send request

More machines from HESSE + CO Maschinenfabrik GesmbH