[Zirok]

Hi,

I was navigating through CAM software & saw a new type of NC Program from DYNA machine control.

N100(9)M3S2200$
N102(0)X0Y0Z50.$
N104(0)X43.915Y-100.439$
N106(0)Z36.927$
N108(1)Z35.717F5000$
N110(1)X44.404Y-100.05F30000$
N112(1)X71.576Y-100.5$
N114(3)X74.852Y-105.455I-1.638J2.478$
N116(3)X71.576Y-100.5I1.638J-2.478$

I think the numbers in brackets (1), (3) denote G01, G03.

Can anyone tell me the NAME or Any Other Details for such type of programming?

Thanks
Zirok

[fmc575]

HI
thanks very much abut your help
today i faced problem with the dynapath
i try to rough a cavity with shape but when i start to fish the shape look like sifting in y axis direction. this mean the end-mill in finish path not lay on the rough path
the shifting in Y axis
is that axis lag or other thing
pleas help me again
Best Regards,

Ahmed Hassanin