HUFSCHMIED
Products
143
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Doublecut 1F+1
Doublecut 1F+1 - right cutting with ball end - Fiber-Line - 161R
Is available with the Diameters: Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16 / Ø20
Diameter range: 3,0mm - 20,0mm
Possible coatings: ALX-Standard / DIP-On demand
Ball end mill 2F
|
ball radius R = 0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Ball end mill 2F - ball radius R = 0,5 x d - Graphit Line - 97DC
This Ball end mill 2F is available in the Diameters: Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12
This ball end mill 2F is 100% diamond coated
Ball end mill 2F
|
right helix-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Ball end mill 2F - right helix-right cutting - Proto-Line - HC452
Is available with the Diameters: Ø2 / Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16 / Ø20
Diameter range: 2,0mm - 20,0mm
Possible coatings: DIP-Standard / ALX-On Demand / TL5-On Demand
Ball end mill 3F
|
with "PIRANHA"-geometry with unequal division ball radius R=0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Ball end mill 3F - with "PIRANHA"-geometry with unequal division ball radius R=0,5 x d - Kupfer-Line - 63CWIR
Is available with the Diameters: Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12.
possible coatings: TLX-Standard
Ball end mill 4F
|
ball radius R=0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Ball end mill 4F - ball radius R=0,5 x d - Graphit Line - 95DC
Is available with the Diameters: Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12.
This ball end mill 4F is 100% diamond coated.
Ball end mitt 1F for PMMA/Wax
|
right helix-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Ball end mitt 1F for PMMA/Wax - right helix-right cutting - Dental-Line - 110FPRDT
Is available with the Diameters: Ø0,6 / Ø1 / Ø1,5 / Ø2 / Ø2,5 / Ø3
Diameter range: 0,6mm - 3,0mm
Possible coatings: TLX
Basic material: solid carbid
Carbon-end mill
|
ball nose
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Carbon-end mill - ball nose - Fiber-Line - 107R
Is available with the Diameters: Ø2 / Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16 / Ø20
Diameter range: 2,0mm - 20,0mm
Possible coatings: TL5-Standrad / ALX-On Demand / DIP-On Demand
please indicate wanted teeth. WDV-Toothing on demand.
Fräsen Per Plex-Mini-Ball end mill 1F
|
right helix-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Fräsen Per Plex-Mini-Ball end mill 1F - right helix-right cutting - Fräsen Per Plex - 110FPRM
Is available with the Diameters: Ø0,2 / Ø0,3 / Ø0,4 / Ø0,5 / Ø0,6 / Ø0,8 / Ø1
Diameter range: 0,2mm - 1,0mm
Possible coatings: ALX
Fräsen Per Pley-Ball end mill 1F
|
right helix-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Fräsen Per Plex-Ball end mill 1F - right helix-right cutting - Fräsen per Plex - 110FPER
Is available with the Diameters: Ø1 / Ø1,5 / Ø2 / Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16 / Ø20
Diameter range: 1,0mm - 20,0mm
Possible coatings: ALX
HEXA CUT-End mill
|
left helix-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
HEXA CUT-End mill - left helix-right cutting - Fiber-Line - 067HOR
Is available with the Diameters: Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16 / Ø20
Diameter range: 3,0mm - 20,0mm
Possible coatings: TL5-Standard / ALX-On Demand / DIP-On Demand
HSC-Ball end mill 2F
|
right helix-right cutting ball radius R=0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
HSC-Ball end mill 2F - right helix-right cutting ball radius R=0,5 x d - Proto-Line - HC452
Is available with the Diameters: Ø2 / Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16 / Ø20
possible coatings: ALX
HSC-Ball end mill 3F
|
right helix-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
HSC-Ball end mill 3F - right helix-right cutting - Universal-Line - 103DFOR
Is available with the Diameters: Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16
Diameter range: 3,0mm - 16,0mm
HSC-Ball end mill 4F
|
right helix-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
HSC-Ball end mill 4F - right helix-right cutting - Universal-Line - 95PE
Is available with the Diameters: Ø2 / Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12 / Ø16
Diameter range: 2,0mm - 16,0mm
Possible coatings: ALX-Standard, DIP-auf Anfrage
HSC-Toric end mill 4F
|
for hardened steel from 50 up to 70 HRC
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
HSC-Toric end mill 4F - for hardened steel from 50 up to 70 HRC - Hard-Line - HC244
Is available with the Diameters: Ø4 / Ø5 / Ø6 / Ø8
Diameter range: 4,0mm - 8,0mm
usable e.g. Steel: 1.2379 / 1.2767 / 1.2312, PM-Steel, HSS
Mini-Ball end mill 2F
|
center cutting - ball radius R=0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Mini-Ball end mill 2F - center cutting - ball radius R=0,5 x d - Graphit Line - HM915
Is available with the Diameters: Ø0,2 / Ø0,3 / Ø0,4 / Ø0,5 / Ø0,6 / Ø0,8 / Ø3 / Ø4 / Ø6
This mini-ball end mill 2F is 100% diamond coated.
Mini-Ball end mill 2F
|
right helix - right cuttingball radius R=0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Mini-Ball end mill 2F - right helix - right cuttingball radius R=0,5 x d - Kupfer-Line - HM915
Is available with the Diameters: Ø3 / Ø4 / Ø6
possible coatings: TLX-Standard
Mini-Ball end mill 2F
|
right helix - right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Mini-Ball end mill 2F - right helix - right cutting - Proto-Line HM915
Is available with the Diameters: Ø0,2 / Ø0,3 / Ø0,4 / Ø0,5 / Ø0,6 / Ø0,8 / Ø1,0 / Ø1,2 / Ø1,5 / Ø2
Diameter range: 0,2mm - 2,0mm
Possible coatings: DIP-Standard / ALX-On demand / TL5-On demand
PCD-Ball end mill 2F
|
straight-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
PCD-Ball end mill 2F - straight-right cutting - Fiber-Line - P100RG
Is available with the diameters: Ø3 / Ø3,17 / Ø4 / Ø4,76 / Ø6 / Ø6,35 / Ø7,93 / Ø8 / Ø9,52 / Ø10 / Ø12 / Ø12,7 / Ø16
Diamaeter range: 3,0mm -16,0mm
PCD-Ball ent mill 2F
|
straight-right cutting - ball radius R = 0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
PCD-Ball ent mill 2F - straight-right cutting - ball radius R = 0,5 x d - Graphit-line - P100RG
Is available with the Diameters: Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12.
This PCD-Ball ent mitt is 100% Diamond coatet.
Piranha-Ball end mill
|
ball radius R = 0,5 x d
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Piranha-Ball end mill - ball radius R = 0,5 x d - Graphit Line - 63 CWIR
Is available in the following diameters: Ø1 / Ø2 / Ø3 / Ø4 / Ø5 / Ø6 / Ø8 / Ø10 / Ø12
This piranha ball mill Z3 is 100% diamond coated.
Quarter-round end mill 4F
|
straight-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Quarter-round end mill 4F - straight-right cutting - Fräsen per Plex - HV31
Is available with the Diameters: Ø0,5 / Ø1 / Ø1,5 / Ø2 / Ø2,5 / Ø3 / Ø3,5 / Ø4 / Ø4,5 / Ø5 / Ø6 / Ø7 / Ø8 / Ø10
Diameter range: 0,5mm - 10,0mm
Possible coatings: ALX
Semicircular end mill 2F
|
straight-right cutting
HUFSCHMIED Zerspanungssysteme GmbH
Ball nose end mills
Semicircular end mill 2F - straight-right cutting
Is available with the Diameters: Ø10 / Ø12 / Ø16 / Ø20
possible coatings: ALX
