Machine accessories

The SDP air gap sensor detects the distance between the surface and object with consistent accuracy and outputs it as an absolute value. Even the smallest deviations of the actual position from the target position are reliably detected. This permanently ensures the quality of your product.

Since the gap is calculated on the basis of pressure and flow, the measurement remains accurate at all times, regardless of pressure fluctuations, number and diameter of the nozzles.In addition, the robust measuring pipe can also withstand the purge pressure, eliminating the need to switch between purging and measuring.

Do you monitor your compressed air systems? Discover an easy way to save a lot of energy!
Are you sure that your plant is not running out of air?
The competitiveness of a company is directly related to the energy efficiency of its plants and systems. The generation and distribution of compressed air is the second largest source of energy costs. Efficient leakage monitoring and leakage location are essential parts of energy monitoring and offer benefits in terms of reduced electricity costs, sustainable production and eligibility for statutory funding. The energy savings also allow for competitive advantages through reduced production costs.

Compressed air is not free
Undetected leaks at joints, connection points or non-functioning components can cause extremely high costs every year. The generation of compressed air can account for over 30% of an industrial plant's electricity consumption. Would you like to know what this means for you in practical terms? With small investments and government funding, you can ensure permanent and simple energy savings and allow for condition-based maintenance of your plants. Together with our experts you will find the right solution for your production. Call us:

Avoid damage to machine components, tools or workpieces via permanent monitoring and very short response times. The integration into the PLC makes it possible to adjust the vibration monitoring to the process of the machine or the plant.

Dynamic:
monitoring of dynamic forces, e.g. in milling processes.

Fast:
response times of 1 ms.

Reliable:
machine, tools and workpieces are protected against expensive consequential damage.

Preventive:
early condition monitoring avoids unplanned failures.

Integrated:
direct connection to the machine control via a fieldbus interface.

The mechatronic flow sensors of the SBY series monitor liquid media such as water, glycol solutions, industrial oils or coolants.
The sensors operate to the principle of spring-supported piston. The piston, located in the valve seat in the housing, is lifted by the flowing medium against the spring resistance. The position of the piston indicates the flow. The spring resistance forces the piston to return to its original position with decreasing flow, preventing backflow.
Thanks to its robust mechanical design, the sensor can be used at high pressures and in harsh industrial environments. The product line comprises flow transmitters with analogue output and flow monitors with switching output. The switch points of the flow monitors can be set and fixed via a setting screw.
Depending on the volumetric flow quantity to be detected, devices with different process connections are offered.

Can be used for high flow rates
Very short response time
Easy handling: Switch points continuously adjustable
Variable process connection using adapters
High permissible medium temperature up to 180 °C

- Connection technology meets the M12 and M8 standard (EN 61076) - Reliable sealing even when mounted without tools - Mechanical end stop to protect the O-ring from destruction - Nut secured against shock and vibration due to saw tooth contoured vibration protection - Wide range of sockets, cable plugs, jumpers and splitter boxes ifm's ecolink series comprises sockets, cable plugs, jumper cables and splitter boxes in M8 and M12 design. The range is complemented by adapter sockets, adapter plugs, valve plugs and wirable sockets and plugs. Even when fastened by hand, a perfect lasting seal of sensor, actuator and splitter connections is guaranteed. The integrated end stop protects the O-ring against destruction caused by over-tightening the nut. Even in harsh industrial environments, the connectors are protected against unintended loosening by a special vibration protection. Some types are fitted with highly visible LEDs for operation and switching status indication.

- For applications in hazardous areas - Connection technology meets the M12 standard (EN 61076) - With EC type examination certificate for components - Mechanical end stop to protect the O-ring from destruction - Nut secured against shock and vibration due to saw tooth contoured vibration protect To avoid the risk of explosion products used in hazardous areas are subject to strict requirements. ifm connection technology developed specifically for these applications complies with the international standard requirements and may be used in hazardous areas. The connectors of the EVC series have been tested with an impact energy of 4 joules. To comply with the requirements the nut of the connector has to be firmly attached to the sensor so that it is no longer possible to open it manually. The ifm product range for potentially explosive atmospheres comprises sockets, cable plugs and jumper cables in M12 design. Even in harsh industrial environments, the connectors are protected against unintended loosening by a special vibration protection.

- Reliable sealing even when mounted without tools - Mechanical end stop to protect the O-ring from destruction - Nut secured against shock and vibration due to saw tooth contoured vibration protection - LEDs clearly visible even in cases of high light exposure - High material resistance to oils and lubricants ifm's ecolink series comprises sockets, cable plugs, jumper cables and splitter boxes in M8 and M12 design. Even when fastened by hand, a perfect lasting seal of sensor, actuator and splitter connections is guaranteed. The integrated end stop protects the O-ring against destruction caused by over-tightening the nut. Even in harsh industrial environments, the connectors are protected against unintended loosening by a special vibration protection. Some types are fitted with highly visible LEDs for operation and switching status indication. The products of the ecolink EVC series are resistant to oils and lubricants, making them ideal for use in machine tools and the metalworking industry.

- Connection technology meets the M12 standard (EN 61076) - Reliable sealing even when mounted without tools - Mechanical end stop to protect the O-ring from destruction - Nut secured against shock and vibration due to saw tooth contoured vibration protection - LEDs clearly visible even in cases of high light exposure Connection technology for mobile machines ensures reliable signal transmission of controllers, dialogue units, modules and sensors. The ifm product range comprises sockets, cable plugs, programming, communication and jumper cables. ifm's ecolink EVM series connectors guarantee a perfect lasting seal even when fastened by hand. The integrated end stop protects the O-ring against destruction caused by over-tightening the nut. Even in harsh industrial environments, the connectors are protected against unintended loosening by a special vibration protection. Some types are fitted with highly visible LEDs for operation and switching status indication.

- Weld-slag resistant PUR cable with drag chain suitability - Nut with special weld-slag resistant coating - Mechanical end stop to protect the O-ring from destruction - Nut secured against shock and vibration due to saw tooth contoured vibration protection - LEDs clearly visible even in cases of high light exposure ifm's ecolink series comprises sockets, cable plugs and jumper cables as M8 and M12 versions. Even when fastened by hand, a perfect lasting seal of sensor, actuator and splitter connections is guaranteed. The integrated end stop protects the O-ring against destruction caused by over-tightening the nut. Even in harsh industrial environments, the connectors are protected against unintended loosening by a special vibration protection. Some types are fitted with highly visible LEDs for operation and switching status indication. The products of the ecolink EVW series for use in welding applications have a special PUR-jacketed cable. The non-stick coating of the coupling nut allows weld spatter to roll off the sensor and enables easy and quick cleaning.

- High protection rating for the requirements of harsh industrial environments - Reliable sealing even when mounted without tools - High shock and vibration resistance - LEDs clearly visible even in cases of high light exposure - Wide operating temperature range ifm's ecolink series comprises sockets, cable plugs, jumper cables and splitter boxes in M8 and M12 design. The range is complemented by wirable sockets and plugs. Even when fastened by hand, a perfect lasting seal of sensor, actuator and splitter connections is guaranteed. The integrated end stop protects the O-ring against destruction caused by over-tightening the nut. Even in harsh industrial environments, the connectors are protected against unintended loosening by a special vibration protection. Some types are fitted with highly visible LEDs for operation and switching status indication. Their high-grade stainless steel nut and food-grade sealing materials qualify the ecolink EVT series for use in hygienic and wet areas. The products are resistant to frequent high-pressure cleaning with aggressive cleaning agents. Thanks to their wide temperature range and their insensitivity to fast temperature changes they are particularly suited for use in the food and beverage industry.