Precise, flexible and can be used in any milling machine. The zero point clamping system is the interface between the machine table and the clamping device. Through its use, setup times can be reduced and machine running times efficiently increased. With a repeat accuracy of < 0.005 mm during setup and teardown, it is one of the most precise on the market. The zero point clamping system impresses with its enormous range of variants, as well as its flexibility and expandability. The zero point clamping system with its two grid dimensions 52 and 96 mm offers versatile possibilities for mounting on the machine table. For example, by means of predefined bores matching the common groove spacings or by simple modification of the case-hardened zero point plates. As a result, the zero point clamping system can be used in almost any machine tool - whether in a vertical or horizontal machining center, on 3- or 5-axis tables or attached 4th axes and clamping bridges. With a height of 27 mm, it is still one of the flattest zero point clamping systems on the market. Its low installation height is particularly advantageous in milling machines with little space. If, on the other hand, additional distance to the machine table is required, the zero point clamping system offers a wide range of modular elements to increase accessibility to the clamping system. The mechanical zero point clamping system impresses with its durability, robustness and low maintenance requirements. Thanks to its modularity, the system can be expanded at any time and guarantees the shortest set-up times with the highest precision. LANG offers the following zero point plate types, among others: _{Single Plates:} With one clamping point. Available in rectangular, round or square design. _{Multiple plates:} With up to four clamping points. Available in rectangular, round or square version. _{Module plates:} Multiple plates can be fastened one behind the other and mechanically operated with a tightening screw _{Combination plates:} Combine the two grid dimensions 52 and 96 mm in one zero point plate. Thus, clamping devices of any size can be used in the same plate. _{Adapter plates:} Ensure fast and precise changeover from 96 mm to 52 mm zero point grid. _{Clamping towers:} Multiple clamping systems in the form of towers or pyramids for vertical or horizontal machining centers. Translated with DeepL