isel Germany AG
Products
Successful with cnc technology!
116
isel Germany AG
Linear guide rails
LINEAR GUIDES PSF 15
PSF - profile rail guide and PSS - profile rail slide
A = Compact design
H = High version
Carriage width: F-flange design | M-flange design
Carriage length; S-short version | N-normal version | L-long version
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow version, short version
MN = Narrow version, normal version
ML = Narrow version, long version
A = Compact design
H = High version
Carriage width: F-flange design | M-flange design
Carriage length; S-short version | N-normal version | L-long version
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow version, short version
MN = Narrow version, normal version
ML = Narrow version, long version
ILE 20/20 for increased payloads and feed forces
|
Linear guide rail
isel Germany AG
Linear guide rails
238 xxx xxxx
| 705 cm4 | |
| 2807 cm | |
| 39,4 mm | |
| 54,22 cm² | |
| EN AW-6060 T66 | |
| e6/eV1 | |
| 20,6 kg/m | |
| 22,8 kg/m |
- Spindle pitch p 5 / 10 / 20 mm
- available with one or two integrated ball screw drives!
- Profile lengths 290 mm to 2990 mm in 100 mm steps
- 2, 4, 6 or 8 steel slides
- compatible to the LES predecessor
The linear unit iLE 20/20 is based on a sophisticated linear technology, which has been permanently developed further through many years of experience and numerous specific customer requirements. Customer wishes and experience from the service fields have been incorporated as product developments.
This enables us to offer a suitable linear system for every application and to design tailor-made solutions for individual customer requirements. The linear units are available with one or two integrated ball screw drives (Ø 20 mm), pitches* of optionally 5/10/20/40 mm and with 2, 4, 6 or 8 steel slides with aluminium clamping plates. (* currently only 5 mm available) Profile lengths 290 mm to 2990 mm in 100 mm steps available!
Features
highly rigid and high-precision drive unit with smallest dimensions
high load capacities, high precision and high rigidity due to integrated profiled rail guide
high positioning and repeat accuracy due to ball screw with backlash-free nut system
high traversing speeds with simultaneous high precision due to ball rail systems, large spindle diameters and pitches
Options
Stepper or servo motor
external limit switches
Energy Chains®
Fasteners
Bellows
- available with one or two integrated ball screw drives!
- Profile lengths 290 mm to 2990 mm in 100 mm steps
- 2, 4, 6 or 8 steel slides
- compatible to the LES predecessor
The linear unit iLE 20/20 is based on a sophisticated linear technology, which has been permanently developed further through many years of experience and numerous specific customer requirements. Customer wishes and experience from the service fields have been incorporated as product developments.
This enables us to offer a suitable linear system for every application and to design tailor-made solutions for individual customer requirements. The linear units are available with one or two integrated ball screw drives (Ø 20 mm), pitches* of optionally 5/10/20/40 mm and with 2, 4, 6 or 8 steel slides with aluminium clamping plates. (* currently only 5 mm available) Profile lengths 290 mm to 2990 mm in 100 mm steps available!
Features
highly rigid and high-precision drive unit with smallest dimensions
high load capacities, high precision and high rigidity due to integrated profiled rail guide
high positioning and repeat accuracy due to ball screw with backlash-free nut system
high traversing speeds with simultaneous high precision due to ball rail systems, large spindle diameters and pitches
Options
Stepper or servo motor
external limit switches
Energy Chains®
Fasteners
Bellows
LIinear Unit Configurator / Spindle Drive - LES 4
|
Linear guide rail
isel Germany AG
Linear guide rails
Linear unit with spindle drive - LES 4
Features
- Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without play, central lubrication
- Aluminium shaft mounting profile width 75 x height 75 mm, natural anodised
- Clamping surface and profile underside plane milling
with 2 precision steel shaftsØ 12 h6, material Cf53,hardness 60 ± 2 HRC
- Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without clearance, central lubrication
- Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch
- Profile sealing Abrasion-resistant sealing lips
- Die-cast aluminium end plates
with 2 end or reference switches, repeat accuracy ± 0.02 mm
Sealed angular contact ball bearingsin drive steel flange
Traverse path
at 1 x WS 5 / 70 = profile length (L1) - 150 mm
at 2 x WS 5 / 70 = profile length (L1) - 280 mm
Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments!
Maximum length up to 3490 mm and special lengths on request.
Options
- black anodised aluminium profile
- Electromagnetic brake in the motor module or in the extension of the drive spindle
- Steel slide LS2 (Art.-No. 223007)
- External limit switch mounting kit (see accessories)
Features
- Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without play, central lubrication
- Aluminium shaft mounting profile width 75 x height 75 mm, natural anodised
- Clamping surface and profile underside plane milling
with 2 precision steel shaftsØ 12 h6, material Cf53,hardness 60 ± 2 HRC
- Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without clearance, central lubrication
- Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch
- Profile sealing Abrasion-resistant sealing lips
- Die-cast aluminium end plates
with 2 end or reference switches, repeat accuracy ± 0.02 mm
Sealed angular contact ball bearingsin drive steel flange
Traverse path
at 1 x WS 5 / 70 = profile length (L1) - 150 mm
at 2 x WS 5 / 70 = profile length (L1) - 280 mm
Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments!
Maximum length up to 3490 mm and special lengths on request.
Options
- black anodised aluminium profile
- Electromagnetic brake in the motor module or in the extension of the drive spindle
- Steel slide LS2 (Art.-No. 223007)
- External limit switch mounting kit (see accessories)
Linear Unit Configurator / Spindle Drives - LES5
|
Linear guide rail
isel Germany AG
Linear guide rails
Linear unit with spindle drive - LES 5
Features
Aluminium shaft mounting profile
B225 x H75 mm, natural anodised
clamping surface and profile underside face milled
with 4 precision steel shafts Ø 12 h6, material Cf53, hardness 60 ± 2 HRC
Aluminium shaft slide WS 5/70, 2 x WS 5/70 (70 mm long), adjustable backlash-free, central lubrication
Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch
Profile sealing by abrasion-resistant sealing lips
Die-cast aluminium end plates
with 2 limit or reference switches, repeat accuracy ± 0.02 mm
Sealed angular contact ball bearings in the drive steel flange
Traverse path
at 2 x WS 5 / 70 = profile length (L1) - 150 mm
at 4 x WS 5 / 70 = profile length (L1) - 280 mm
Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments!
Maximum length up to 3490 mm and special lengths on request.
Options
black anodised aluminium profile
electromagnetic brake
Steel slide LS2 (Art.-No. 223007)
Limit switch mounting kit (see accessories)
Features
Aluminium shaft mounting profile
B225 x H75 mm, natural anodised
clamping surface and profile underside face milled
with 4 precision steel shafts Ø 12 h6, material Cf53, hardness 60 ± 2 HRC
Aluminium shaft slide WS 5/70, 2 x WS 5/70 (70 mm long), adjustable backlash-free, central lubrication
Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch
Profile sealing by abrasion-resistant sealing lips
Die-cast aluminium end plates
with 2 limit or reference switches, repeat accuracy ± 0.02 mm
Sealed angular contact ball bearings in the drive steel flange
Traverse path
at 2 x WS 5 / 70 = profile length (L1) - 150 mm
at 4 x WS 5 / 70 = profile length (L1) - 280 mm
Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments!
Maximum length up to 3490 mm and special lengths on request.
Options
black anodised aluminium profile
electromagnetic brake
Steel slide LS2 (Art.-No. 223007)
Limit switch mounting kit (see accessories)
Linear Unit Configurator / Spindle Drive- LES6
|
Linear guide rail
isel Germany AG
Linear guide rails
Features
Aluminium shaft mounting profile width 150 x height 75 mm, natural anodised
Clamping surface and profile underside plane milling
with 4 precision steel shafts Ø 12 h6, material Cf53,hardness 60 ± 2 HRC
Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without clearance, central lubrication
Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch
Profile sealing Abrasion-resistant sealing lips
Die-cast aluminium end plates
with 2 limit or reference switches, repeat accuracy ± 0.02 mm
Sealed angular contact ball bearingsin drive steel flange
Traverse path
at 2 x WS 5 / 70 = profile length (L1) - 150 mm
at 4 x WS 5 / 70 = profile length (L1) - 280 mm
Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments!
Options
black anodised aluminium profile
electromagnetic brake
Steel slide LS2
Limit switch mounting kit
On request
length measuring system
bellows cover
Mounting on the left side of the motor module
Aluminium shaft mounting profile width 150 x height 75 mm, natural anodised
Clamping surface and profile underside plane milling
with 4 precision steel shafts Ø 12 h6, material Cf53,hardness 60 ± 2 HRC
Aluminium shaft slide WS 5/70.2 x WS 5/70 (70 mm long), adjustable without clearance, central lubrication
Ball screws with 2.5 / 4 / 5 / 10 / 20 mm pitch
Profile sealing Abrasion-resistant sealing lips
Die-cast aluminium end plates
with 2 limit or reference switches, repeat accuracy ± 0.02 mm
Sealed angular contact ball bearingsin drive steel flange
Traverse path
at 2 x WS 5 / 70 = profile length (L1) - 150 mm
at 4 x WS 5 / 70 = profile length (L1) - 280 mm
Profile length (L1) from 290 mm to 2990 mm can be ordered in 100 mm increments!
Options
black anodised aluminium profile
electromagnetic brake
Steel slide LS2
Limit switch mounting kit
On request
length measuring system
bellows cover
Mounting on the left side of the motor module
Linear unit with toothed belt drive LEZ 1
|
Linear guide rail
isel Germany AG
Linear guide rails
232005 xxxx
| HTD 3M, Breite 9 mm | |
| 0,430 kg | |
| 1000 mm ^= 3 kg | |
| 0,0225 kg/m | |
| 1,03 kg | |
| 0,200 kg/100 mm | |
| Ø 19,1 mm | |
| 5,585·10-6 kgm2 | |
| 60 mm |
Lowest price, simplest & narrowest axis, guided on both sides, on request up to 6,000 mm
- Aluminium profile, miniature linear guide LFS-8-2
- backlash-free feed with toothed belt drive
- Special lengths in 100 mm grid on request, max. 6000 mm
- Mounting via integrated threaded rail M6, grid 50 mm
travel:
without motor, with shaft slide | profile length X -150 mm
without motor, with carriage | profile length X -131 mm
Options:
Special lengths in 100 mm grid on request, max. 6000 mm
Mounting via integrated threaded rail M6, grid 50 mm
guideways and shaft slides also available in stainless steel !
- Aluminium profile, miniature linear guide LFS-8-2
- backlash-free feed with toothed belt drive
- Special lengths in 100 mm grid on request, max. 6000 mm
- Mounting via integrated threaded rail M6, grid 50 mm
travel:
without motor, with shaft slide | profile length X -150 mm
without motor, with carriage | profile length X -131 mm
Options:
Special lengths in 100 mm grid on request, max. 6000 mm
Mounting via integrated threaded rail M6, grid 50 mm
guideways and shaft slides also available in stainless steel !
Linear unit with toothed belt drive LEZ 2
|
Linear guide rail
isel Germany AG
Linear guide rails
Flat axis, mounting from above possible, length up to 6,000 mm
characteristics
- Aluminium profile, with miniature linear guide LFS-8-5
- backlash-free feed with toothed belt drive
- Timing belt with 5 mm pitch, width 25 mm
- Feed rate max. 5 m/s
- Shaft slide WS 3, L 176 x W 130 mm
- Feed per revolution: 70 mm
- Repeatability
- less than or equal to ± 0,2 mm
- Limit or reference switch accuracy < 0.1 mm
- available in lengths up to 6000 mm
travel:
- without motor, with shaft slide | profile length X -235 mm
- without motor, with carriage | profile length X -235 mm
Guides and shaft slides also available in stainless steel !
Translated with DeepL
characteristics
- Aluminium profile, with miniature linear guide LFS-8-5
- backlash-free feed with toothed belt drive
- Timing belt with 5 mm pitch, width 25 mm
- Feed rate max. 5 m/s
- Shaft slide WS 3, L 176 x W 130 mm
- Feed per revolution: 70 mm
- Repeatability
- less than or equal to ± 0,2 mm
- Limit or reference switch accuracy < 0.1 mm
- available in lengths up to 6000 mm
travel:
- without motor, with shaft slide | profile length X -235 mm
- without motor, with carriage | profile length X -235 mm
Guides and shaft slides also available in stainless steel !
Translated with DeepL
Linear unit with toothed belt drive LEZ 3
|
Linear guide rail
isel Germany AG
Linear guide rails
characteristics
-aluminium profile, miniature linear guide LFS-8-4
- backlash-free feed with toothed belt drive, toothed belt with 5 mm pitch, width 25 mm
- Feed rate max. 5 m/s
- Shaft slide WS3, L176xW130 mm
- Feed per revolution:
- 70 mm or 150 mm
- Repeatability less than or equal to ± 0,2 mm
- Limit or reference switch accuracy < 0.1 mm
- available in lengths up to 6000 mm
- Motor modules can be flange-mounted on the right and left
travel:
without motor, with shaft slide | profile length X -235 mm
without motor, with carriage | profile length X -235 mm
Guides and shaft slides also available in stainless steel !
-aluminium profile, miniature linear guide LFS-8-4
- backlash-free feed with toothed belt drive, toothed belt with 5 mm pitch, width 25 mm
- Feed rate max. 5 m/s
- Shaft slide WS3, L176xW130 mm
- Feed per revolution:
- 70 mm or 150 mm
- Repeatability less than or equal to ± 0,2 mm
- Limit or reference switch accuracy < 0.1 mm
- available in lengths up to 6000 mm
- Motor modules can be flange-mounted on the right and left
travel:
without motor, with shaft slide | profile length X -235 mm
without motor, with carriage | profile length X -235 mm
Guides and shaft slides also available in stainless steel !
LINEAR GUIDES PSF 20
|
Linear guide rail
isel Germany AG
Linear guide rails
PSF - profile rail guide and PSS - profile rail slide
ARC = Compact design
HRC/ERC = High version
Carriage width: F-flange design | M-flange design
Carriage length; S-short version | N-normal version | L-long version
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow Ahttps://de.industryarena.com/isel/dashboard/products/create?category_id=1109#enusführung, short version
MN = Narrow version, normal version
ML = Narrow version, long version
ARC = Compact design
HRC/ERC = High version
Carriage width: F-flange design | M-flange design
Carriage length; S-short version | N-normal version | L-long version
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow Ahttps://de.industryarena.com/isel/dashboard/products/create?category_id=1109#enusführung, short version
MN = Narrow version, normal version
ML = Narrow version, long version
LINEAR GUIDES PSF 25
|
Linear guide rail
isel Germany AG
Linear guide rails
PSF - profile rail guide and PSS - profile rail slide
A = Compact design
H = High version
Carriage width: F-flange design | M-flange design
Carriage length; S-short version | N-normal version | L-long version
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow version, short version
MN = Narrow version, normal version
ML = Narrow version, long version
A = Compact design
H = High version
Carriage width: F-flange design | M-flange design
Carriage length; S-short version | N-normal version | L-long version
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow version, short version
MN = Narrow version, normal version
ML = Narrow version, long version
LINEAR GUIDES PSF 30
|
Linear guide rail
isel Germany AG
Linear guide rails
PSF - Profile rail guide and PSS - Profile rail slide
A = Compact design
H= High version
Carriage width: F-flange design | M-flange design
Carriage length; S short version | N normal version | L long
Design
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow version, short version
MN = Narrow version, normal version
ML = Narrow version, long version
A = Compact design
H= High version
Carriage width: F-flange design | M-flange design
Carriage length; S short version | N normal version | L long
Design
FS = flange, short version
FN = flange, normal design
FL = flange, long version
MS = Narrow version, short version
MN = Narrow version, normal version
ML = Narrow version, long version
