Milling machines

INSTANT AUTOMATION - OUT OF THE BOX! Exact CNC machines with linear guides and ball screws - Repeat accuracy ± 0.02 mm. Advantages: - low weight and high accuracy - smooth running and high travel speeds - Use of high-quality aluminium parts with flat milled surfaces - Units equipped with two limit switches per axis - configurable in several versions and different sizes: 1210 x 946 530 x 500 (246203 M) 1210 x 1196 530 x 750 (246203 2040 M) 1210 x 1446 530 x 1000 (246203 2054 M) 1460 x 1446 780 x 850 (246203 2067 M) 1710 x 1846 1030 x 1250 (246203 2130 M)

Compact CNC milling machine ready for connection The EuroMod CNC milling machine is a ready-to-connect CNC system with high operating comfort for a variety of tasks and applications. The mechanical basis is formed by stable, low-vibration mechanical components made of aluminium-steel joints. The backlash-free ball screws used in the linear axes ensure high accuracy. During the development of the EuroMod CNC milling machine, special emphasis was placed on a small footprint. The servo motors used are optimally matched to the mechanics, the power electronics and the control system. The entire electronics of the EuroMod CNC milling machine is housed in a switch cabinet, operation is via iOP-19, CNC operating units. EuroMod® CNC machines are available as compact units in 3 standard sizes with traverse paths from. X = 610 / 910 mm, Y = 300 / 470 / 650 mm, Z = 300 mm Diffuser = 365 mm Options - Cooling spray device - coolmine - chip tray - Tool length probe - Spindle motors (can be used up to iSA2200) - Rotary changing systems SK 11 and SK 20 - Linear changing systems SK 11 and SK 20 - 4th axis with tailstock unit or e.g. assembly of the RDH series - 4th + 5th axis as rotary swivel axis - Engine room lighting LED - RAL special colour according to customer requirements - Pneumatic sliding door - Machine handwheel - safety light curtain - Size adjustment - Breakthroughs in the machine table - further doors - laser safety glass - Hood attachment closed - CAD/CAM software - Workpiece clamping systems (hand levers, vacuum plates, etc.) - extraction systems - rotating units - Cutter breakage control - Customer-specific adaptations - Extension of valve terminals - I/O distributor - I/O Coding - Mechanical height sensor - Sealing air kit for milling motors - Various postprocessors CAD/CAM - Interface adaptations for laser devices - PC control panel with free PCI slots (for use with external PCI hardware) - stainless steel keyboard - Milling and engraving spindles - vacuum clamping tables - suction device - Closed or light-proof hood for laser applications Features Portal passage: 365 mm backlash-free adjusted steel KG drives with steel linear guides maintenance-free servomotors Spindle motors iSA 500 / 750 / 1500 / 1500L and iSA 900 / 1500WL / 2200 / 3600 best suited for multi-shift operation swivelling control panel iOP-19-TFT Control PC iPC 25 incl. CAN PCI card Win 7 / 64 bit network connection For editing: Aluminium / light metals milled plastics wood foams plexiglass Best suited for: multi-shift operation Processing of light metals, wood, plastic and foam materials as well as Plexiglas superstructure Portal: fixed, table: movable

OverHead® Gantry - our flexible space miracle with servo motor drive Optimal space utilization with the smallest possible space requirement, but how? Maximum function with minimum space requirement is the motto of the OverHead Gantry M. A wide range of variable equipment features and additional options allow the CNC machine to be optimally configured for many industries and work areas. Applications for the OverHead Gantry M include machining, measuring, testing and dosing applications. Due to the power of the milling motor of up to 2.2 kW and 20,000 rpm as well as a traversing speed of up to 250 mm/sec, it is suitable for processing wood and plastics as well as light and non-ferrous metals. The free machining area and the excellent price/performance ratio offer decisive advantages over comparable products. The OverHead Gantry M is available in four different sizes for different process ranges from M20 to M50. Do you need the control cabinet on the right-hand side or would you prefer the operating unit on the left? No problem - we are happy to consider your wishes and will of course take care of maintenance and support for your OverHead Gantry M. Options - Cooling spray device - Coolmin - Chip tray - Tool length measuring probe - Spindle motors (up to iSA2200 applicable) - Rotary changing systems SK 11 and SK 20 - Linear changing systems SK 11 and SK 20 - 4. axis with tailstock unit or e.g. assembly of the RDH series - 4. + 5. axis as a rotating/swivel axis - Engine room lighting LED - RAL special colour according to customer request - Pneumatic sliding door - Machine Handwheel - Safety light curtain - Adaptation Size - Breakthroughs in the machine table - further doors - Laser protection glass - Hood attachment closed - CAD/CAM software - Workpiece clamping systems (hand lever, vacuum plates, etc.) - Extraction systems more options here characteristics - Gantry function in Y-axis (synchronized via ProNC software) - CAN bus system with EC servo motors in all axes - steel KG drives with steel linear guides adjusted backlash-free - T-slot table for easy clamping of the workpiece and accessories - variable passage of 340 mm

FlatCom® Series M-LES - with servo motor drive Ideal for long travels! The FlatCom® M-LES is the revised version of our bestseller with a new operating panel, maintenance-free EC drive and dust-protected control and power electronics installed in the control cabinet, including a CAN-PCI control card integrated in the control computer. The basis is formed by stable aluminium-steel frames with linear units. The backlash-free ball screws used in the linear axes ensure high precision, accuracy and smooth running. FlatCom® CNC machines are available as compact units in 4 standard sizes. We are happy to design and manufacture individual special machines for you. Talk to us! +49 (0) 6659 981 800 4 standard sizes (M 20 / M 30 / M 40 / M 50) with travels from: X = 710 / 1210 mm Y = 500 / 800 / 1300 mm Z = 210 mm (optional 310) Diffuser = 250 mm (optional 350) in open and closed design with sliding door and transparent enclosure. Special machines can be designed and manufactured for OEM customers in joint cooperation. Options: - PC control panel with free PCI slots (for use with external PCI hardware) - Maximum 6 interpolated axes + 6 handling axes - Portal passage 250 mm - Cooling spray device - coolmine - chip tray - Tool length probe - Spindle motors (can be used up to iSA2200) - Rotary changing systems SK 11 and SK 20 - Linear changing systems SK 11 and SK 20 - 4th axis with tailstock unit or e.g. assembly of the RDH series - 4th + 5th axis as rotary swivel axis - Engine room lighting LED - RAL special colour according to customer requirements - Pneumatic sliding door - Machine handwheel - safety light curtain - Size adjustment - Breakthroughs in the machine table - further doors - laser safety glass - Hood attachment closed - CAD/CAM software - Workpiece clamping systems (hand levers, vacuum plates, etc.) - extraction systems Best suited for: - multi-shift operation Machining from - Aluminium / light metals - milled plastics - wood - foams - plexiglass Advantages - high stiffness with low weight at the same time - maintenance-free motors - best suited for long travels - extensive accessories

Large machining areas up to 1700 x 2500 mm The FlatCom® L is a stable machine for cutting and non-cutting processing in the wood industry, advertising technology or also for various assembly work. With travels of 1700 x 2500 mm, it is the largest CNC machine in the extensive program of isel Germany AG. With extensions such as a vacuum table, speed-controlled spindle motors, tool changing stations in various designs or handling systems from our robotics division, you are equipped innovatively for the future. Options - Cooling spray device - coolmine - chip tray - Tool length probe - Spindle motors (can be used up to iSA2200) - Rotary changing systems SK 11 and SK 20 - Linear changing systems SK 11 and SK 20 - 4th axis with tailstock unit or e.g. assembly of the RDH series - 4th + 5th axis as rotary swivel axis - Engine room lighting LED - RAL special colour according to customer requirements - Pneumatic sliding door - Machine handwheel - safety light curtain - Size adjustment - Breakthroughs in the machine table - further doors laser safety glass Hood attachment closed CAD/CAM software Workpiece clamping systems (hand levers, vacuum plates, etc.) extraction systems rotating units Cutter breakage control Customer-specific adaptations Extension of valve terminals I/O distributor I/O Coding Mechanical height sensor Sealing air kit for milling motors Various postprocessors CAD/CAM Interface adaptations for laser devices PC control panel with free PCI slots (for use with external PCI hardware) stainless steel keyboard Milling and engraving spindles vacuum clamping tables suction device Closed or light-proof hood for laser applications Maximum 6 interpolated axes + 6 handling axes Portal passage according to customer requirements Best suited - multi-shift operation Processing of - Aluminium / light metals - milled plastics - Non-ferrous metals (brass, bronze, etc.) - ceramics - synthetic materials - wood Advantages - 5-axis machining - Large machining areas up to 1700 x 2500 mm - Gantry drive - movable portal, fixed table - Removable hood Translated with DeepL

FlatCom® Series XL (GFV/GFY) - with servo motor drive Robust CNC machine for 2.5 D/3D machining with a frame made from special aluminium profiles, a maintenance-free EC-drive and modern control software installed on the control panel.This machine guarantees maximum flexibility and e?ciency for the respective application due to its wide range of possible applications and combinations. Options cooling spray device coolmin blade tray tool length sensor spindle motors (up to iSA2200 applicable) round changing systems SK 11 and SK 20 linear changing systems SK 11 and SK 20 4th axis with tailstock unit 4th + 5th axis as rotary tilting unit LED-lighting RAL special colour according to customer requirements pneumatic sliding door machine handwheel safety light curtain size adjustment openings in the machine table further doors laser safety glass closed hood attachment CAD/CAM-Software Workpiece clamping systems (hand levers, vacuum plates, etc.) extraction systems rotating units cutter breakage control customer-specific adaptations extension of valve terminals I/O distributor I/O Coding mechanical height sensor sealing air kit for milling motors various postprocessors CAD/CAM interface adaptations for laser devices PC control console with free PCI plug-ins (for use by external PCI hardware) stainless steel keyboard milling and engraving spindles vacuum clamping tables suction device closed or light-proof hood for laser applications maximum 6 interpolated axes + 6 handling axes portal passage 435mm Ideally suited for multi-shift operation Machining of light metals, non frrous metals (brass, bronze etc.) CFRP Ceramic plastics wood Benefits 5-axis machining Windows-based software Gantry drive Mobile portal, fixed table Set up Portal: fixed, bench: moveable

44,990.00 ? Special price ! Application areas: Jewelry industry Jewelry processing Medical technology Precision engineering Micromachining Mold and prototype construction Dental technology Advantages: 5 axes simultaneous CNC machine ? Wet/dry machining ? Workpiece zero point clamping system as standard ? Servo drives with absolute encoder ? Integrated control with touch screen ? Aluminum base frame ? Translated with DeepL

CNC machines of the ICP series are further developments of the proven CPM series. By introducing a sliding door, the machines can now be operated while seated, which leads to shorter cycle times for hood opening, among other things. The chassis is completely bolted, instead of welded like the predecessors. This results in a higher precision in the construction of the machine as well as an improved service friendliness. Furthermore, the resonance and vibration behavior could be optimized and thus a lower noise development could be achieved. By introducing a sliding door, the machines can now be operated while seated, which leads to shorter cycle times for hood opening, among other things.

The table machine ICV 4030 with mains connection has proven itself in practice for years and presents itself in a completely new design at the beginning of the year. The newly designed machine door with improved hood opening enables a longer travel in the Z-axis and thus a higher passage. Due to the redesigned machine hood and the resulting larger access opening, a 4th axis can now be easily integrated. Maintenance-free EC servo motors are used as the drive and the reliable LES 5 is used in the X axis. Furthermore, the universal control PC iPC 25 is installed. Central lubrication makes the machine more service-friendly overall. Additional signal lamps have also been integrated. Translated with DeepL

-5 axes simultaneous CNC machine -Wet/dry machining -Workpiece zero point clamping system -Ideal for precision mechanics -Integrated control with 24" touchscreen -15-fold tool changer Typical materials: -Aluminum / light metals -CoCr -Titanium The iMG 1010 offers a compact solution for machining workpieces up to 100x100x100 mm. The machine enables a wide range of materials such as aluminum, CoCr or titanium to be machined precisely. The arrangement of the axes enables almost all positions on the workpiece to be reached without the need for reloading. The special mounting of the Y-axis is to be emphasized, which guarantees high stability as well as enormous vibration damping due to its installation position. The selection of workpiece clamping devices and holders in combination with the zero-point clamping system makes the machine a versatile machining center. The design allows wet/dry machining without time-consuming changeover. The basic design allows the machine to be extended by an optional handling system, which can enter the machine room from the right, left or from above. This allows workpieces to be changed automatically. The zero-point clamping system serves as an interface and ensures the exact and repeatable positioning of the workpiece. By means of software interfaces, the system can be integrated into network-controlled automated manufacturing processes. The maintenance-friendly design and the durable direct spindle drives save service costs and time and offer a reliable machining system. During development, care was taken to ensure that all elements are easily accessible and yet protected from external influences to guarantee a long service life. A wide range of optional extensions are available for the system. For example, a practical base frame is available for storing tools, material or the extraction system. Areas of application The machine can be used flexibly for a wide range of materials. Metals and plastics can be processed wet and dry without retooling. The zero point clamping system facilitates the handling of the workpieces. Fields of application The machine can be used flexibly for a wide variety of materials. Metals and plastics can be processed wet and dry without changeover. The zero-point clamping system facilitates the handling of the workpieces. Areas of application: Precision parts for the areas: medical technology Precision Mechanics Micromachining Mould and prototype construction Dental Technology Jewelry Industry

IMG 4040 / 6040 / 8040 With the IMG machine series, a 3/4/5-axis milling machine with solid mineral casting machine frame, metals as well as steel can be machined. The IMG milling machines not only boast an elegant design, but also have a compact but stable construction, allowing economical working in the smallest spaces. With covered linear guides and large ball screws, downtimes are minimised and the requirements for machining steel are met. Thanks to the external 15-fold tool changer, the working area is not restricted, with the result that even larger work-pieces can be machined with no restrictions. Proven isel components including the isel spindle drives consisting of recirculating ball screws and preloaded linear bearings have been integrated into the successful  combination of size and functionality. The IMG milling machines have been developed for high capacity, productivity and flexibility in order to gain a lot of machining space while at the same time taking up as little space as possible. An extensive range of accessories predestines the machine for numerous application areas from prototype construction to small series production. The solid mineral casting substructure offers a stable and solid platform. Features 3/4/5-axle operation can be extended 15-fold tool changer Working range not reduced during tool change Control panel with 21? touch screen for easy operation Hand wheel for set-up operation Integrated lighting in the working area Recirculating ball screws in all linear axes allguides covered Rotating/swivel axes equipped with cast ironblock guides Air-cooled milling spindle with SK30 tool holder Largely dimensioned recirculating ball bearing guidesin all linear axes Chip collection tray incl. cleaning flap Integrated coolant pump Settling basin for coolant with cleaning opening Solid mineral cast machine bed